Behringer ULTRA-DI DI600P Manual - Page 2

BEHRINGER ULTRA-DI DI600P + Before connecting to a loudspeaker connector, please make sure that the GROUND LIFT switch is in LIFT position (no ground connection). This prevents accidental shorting of the amp output. Besides, the tip of the input connector should be connected to the speaker connector marked with red. The metal casing of the DI600P should in no case have physical contact to other equipment. 3. SPECIFICATIONS SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. Frequency response THD+N (distortion) INPUT Level change (input ß output) OUTPUT Impedance ratio (input ß output) INST/AMP switch FILTER switch Dimensions (H x W x D) Weight 40 Hz (-3 dB) to 20 kHz 0.003% @ 1 kHz, input level +4 dBu ¼" TS (unbalanced) -20 dB Balanced XLR 110 : 1 30 dB pad Low pass @ 7.5 kHz (-3 dB) 1.4" x 5" x 3.75" (35 mm x 128 mm x 95 mm) approx. 0.66 lbs (0.3 kg) 7) Install in accordance with the manufacturer’s instructions. 8) Only use attachments/accessories specified by the manufacturer. 9) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way. BEHRINGER continuously strives to assure the highest quality standards possible. Required modifications may be implemented without prior notice. Technical data and the appearance of the unit may deviate from the above values and/or illustrations. 4. WARRANTY For our current warranty terms, please refer to our website at http://www.behringer.com Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. The names of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of their respective owners. Their use neither constitutes a claim of the trademarks by BEHRINGER® nor affiliation of the trademark owners with BEHRINGER®. BEHRINGER® accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colours and specification may vary slightly from product. Products are sold through our authorised dealers only. Distributors and dealers are not agents of BEHRINGER® and have absolutely no authority to bind BEHRINGER® by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER® is a registered trademark. ALL RIGHTS RESERVED © 2006 BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany. Tel. +49 2154 9206 0, Fax +49 2154 9206 4603