Behringer ULTRABASS BXR1800H Manual - Page 10

ULTRABASS BXR1800H 5. INSTALLATION 6. SPECIFICATIONS 5.1 Audio connections Except for the headphones output, all ¼" jacks on the BEHRINGER ULTRABASS are ¼" TS connectors. The DIRECT OUTPUT is on a balanced XLR connector. The CD inputs are on RCA connectors.  Please keep in mind that your ULTRABASS should be installed and operated only by those who possess sufficient technical knowledge about its installation and operation. Everyone dealing with your ULTRABASS should be sufficiently grounded both during the installation as well as during actual usage. Failure to do so may cause undesirable or faulty operation due to electromagnetic discharges, etc. AUDIO INPUTS Instrument input Input impedance CD input Input impedance FX Insert Return Input impedance AUDIO OUTPUTS Phones Out Direct Out Output impedance Line Out Output impedance FX Insert Send Output impedance Loudspeaker connector Load impedance ¼" TS 250 kΩ RCA 40 kΩ ¼" TS 50 kΩ ¼" TRS stereo XLR 100 Ω ¼" TS 100 Ω ¼" TS 2.2 kΩ ¼" TS min. 4 Ω AMPLIFIER Peak Power 180 W @ 4 Ω Fig. 5.1: XLR connections POWER SUPPLY Mains voltage Power consumption Fuse Mains connection U.S./Canada 120 V~, 60 Hz Europe/U.K./Australia 230 V~, 50 Hz China/Korea 220 V~, 50/60 Hz Japan 100 V~, 50 - 60 Hz General export model 120/230 V~, 50 - 60 Hz max. 290 W 100 - 120 V~: T 6.3 A H 250 V 220 - 240 V~: T 3.15 A H 250 V Standard IEC receptacle DIMENSIONS/WEIGHT Dimensions (H x W x D) Weight approx. 4 3/5" (117 mm) x 17 4/5" (452 mm) x 8 9/10" (225 mm) approx. 16.5 lbs (7.5 kg) Fig. 5.2: ¼" TS connector Fig. 5.3: ¼" stereo TRS connector for PHONES BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated. 10 6. SPECIFICATIONS