Behringer ULTRAGRAPH PRO FBQ3102 Brochure - Page 3

Page 3 of 6 ULTRAGRAPH PRO FBQ6200 / FBQ3102 FBQ1502 FBQ6200 Front Panel Limiter switch activates/ deactivates built-in limiter (per channel) Input/Output Level Meter displays signal level Input Level control Low Cut control adjusts lower cut-off frequency between 10 and 40 Hz Threshold control Limiter meter Pink Noise switch Pink Noise Meter sets amount of displays amount activates/deactivates displays generator gain reduction of gain reduction built-in signal generator signal level Noise Level control sets level of generator signal FBQ switch activates/ deactivates built-in Feedback Detection System High Cut control adjusts upper cut-off frequency between 2.5 and 30 kHz Range switch toggles maximum EQ fader range between ±12 and ±6 dB I/O Meter In/Out switch displays either input or output signal level FBQ3102 Front Panel Audio In/Out switch Subwoofer switch Subwoofer engages or bypasses activates/deactivates Level control entire EQ function subwoofer output Sub Out Meter displays signal level at output connector on rear panel Input/Output Level Meter displays signal level I/O Meter In/Out switch displays either input or output signal level Audio In/Out switch engages or bypasses entire EQ function Input Level control 31 sliding EQ faders for boost/cut of individual frequency bands with LEDs High Cut control adjusts upper cut-off frequency between 2.5 and 30 kHz FBQ switch activates/ deactivates built-in Feedback Detection System Range switch toggles maximum EQ fader range between ±12 and ±6 dB Low Cut control adjusts lower cut-off frequency between 10 and 40 Hz 31 sliding EQ faders per channel for boost/cut of individual frequency bands with LEDs FBQ6200 / FBQ3102 Rear Panel Power switch Standard IEC Power socket Balanced XLR & balanced/unbalanced 1/4" TRS Inputs X-Over Frequency control Sub Out XLR sends LF selects desired subwoofer content to subwoofers frequency cut-off Balanced XLR & balanced/unbalanced 1/4" TRS Outputs