Behringer VINTAGE TIME MACHINE VM1 Manual - Page 1

VINTAGE TIME MACHINE VM1 Thank you for showing your confidence in us by purchasing the BEHRINGER VINTAGE TIME MACHINE VM1. This high-quality classic effect delivers true analog delay with up to 450 ms of organic echo to rival any tape delay, vibrant chorus and mind-bending vibrato. 1. Controls The SERIAL NUMBER is located on the underside. {1} Use the 9 V_ connection to plug in a 9 V power supply. {2} Use the POWER switch to activate/deactivate the unit. {3} The POWER LED lights up when the unit is activated. {4} The 1/4" TS EFFECT OUT connector sends the signal to your amp. {5} The 1/4" TS DIRECT OUT connector always provides the direct, unaffected signal to feed for example a separate guitar amp. {6} Use this 1/4" TS INPUT connector to plug in the instrument cable. {7} The CHORUS/VIBRATO switch selects between chorus or vibrato effect. {8} The LEVEL control adjusts the input level. The LEVEL control adjusts the input level. {9} The OVERLOAD LED illuminates when the input signal is too high. In this case reduce the input level with the LEVEL control. [10] The MIX control adjusts the balance between the effect signal and the direct signal. [11] The FEEDBACK control determines the amount of signal repetitions. Since the output signal is fed back to the input of the delay line, it is possible to generate a self oscillation at high settings of this control. [12] The DELAY control adjusts the time between the direct signal and the signal repetitions (Delay Time). [13] The CHORUS/VIBRATO control adjusts the effects speed of the modulation effect added to the delay. Slow settings produce a chorus effect while fast settings provide vibrato. [14] Use the footswitch to activate/deactivate the effect. 2. Sample settings 3. Warranty For our current warranty terms, please refer to our website at http://www.behringer.com. In Connector Impedance Effect Out Connector Impedance Direct Out Connector Impedance 4. Specifications 1/4" TS 100 kΩ 1/4" TS 1 kΩ 1/4" TS 100 kΩ POWER SUPPLY Power supply Power connector Power consumption Dimensions (H x W x D) Weight 9 V_, 100 mA (included) BEHRINGER PSU-SB 2 mm jack, negative center 50 mA approx. 61 mm (2 2/5") x 200 mm (7 4/5") x 172 mm (6 4/5") approx. 1.07 kg (2.37 lbs) BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown. Specifications 3