Behringer VOICE STUDIO Quick Start Guide - Page 2

PODCAST & RECORDING QUICK-START GUIDE Installation Guide - USB mixer/interface Microphone Mixer/Interface Computer XLR cable USB cable Headphones Note: The Voice Studio package does not include a pair of headphones Basic Equipment: Microphone, USB mixer/interface, headphones, computer Now that you have a basic understanding of what podcasting is and have the necessary gear, it's time to set up the equipment, install the software and get started. 1. Install any necessary drivers before connecting your USB interface. They can be downloaded from the download area of the product page, or from the support section at www.musictribe.com/brand/behringer/home. 2. Once the drivers are installed, you may connect the interface to your computer with the included USB cable. 3. Connect your microphone to the input of your mixer or audio interface using the included XLR cable. 4. Connect a monitoring device. You may connect the outputs of the mixer/ interface to a pair of powered speakers, or connect a set of headphones. 5. Be sure to read the manuals for the individual components of your podcast/ recording system to ensure proper hookup and operation. 6. If using a Windows operating system, it is important to install the necessary ASIO driver. This is not a factor on Mac systems. Visit the download area of the USB interface's product page, or go to the Support > Download Center at www.musictribe.com/brand/c/behringer/downloads?active=downloads to download the required driver. 2