Behringer XENYX Q1002USB Brochure - Page 9

XENYX QX2442USB/QX2222USB/ QX1832USB/QX1622USB/ QX1222USB/QX1204USB/ Q1204USB/QX1202USB/ Q1202USB/QX1002USB/ Q1002USB/Q802USB/Q502USB QX1202USB/ Q1202USB/QX1002USB/Q1002USB Channel Strips XLR mic input with XENYX preamp ¼" balanced/ unbalanced input Gain control adjusts input signal level High EQ ±15 dB, centered @ 12 kHz Mid EQ ±15 dB, centered @ 2.5 kHz Low EQ ±15 dB, centered @ 80 Hz with additional Low Cut filter switch Aux Send for monitor/FX Pan control adjusts position of signal in stereo image Channel Level control adjusts signal level in Main Mix Stereo channel ¼" balanced/unbalanced input Line In jacks Compressor knob adjusts effect on mono channel Stereo channel Aux Send for monitor/FX Input sensitivity switch selects between +4 dBu and -10 dBV Balance adjusts comparative level of L & R line inputs Stereo channel Level control adjusts signal level in Main Mix Clip LED lights when input signal approaches distortion Page 9 of 12 QX1202USB/ Q1202USB/QX1002USB/Q1002USB Main Section QX1202USB/Q1202USB/QX1002USB/Q1002USB Patchbay FX selection readout with Signal and Clip LEDs CLIP SIG FX Program selector USB assign switch 2 TR assign switch Phones/Control Room level control Phantom power switch 4-tier VU meter with +48 V and Power LEDs FX To Main adjusts level of FX to Main mix (QX models only) Main Mix fader FX To CTRL adjusts level of FX to CTRL Room Out Phones jack FX Send Stereo channel ¼" unbalanced input Line In jacks Main Out unbalanced ¼" jacks CTRL Room Output ¼" unbalanced jacks CD/Tape In/Out RCA sockets