Behringer XENYX X1222USB Brochure - Page 9

XENYX X2442USB X2222USB / X1832USB X1622USB / X1222USB X1204USB / 1204USB XLR mic input with XENYX preamp Page 9 of 17 X1622USB The X1622USB features four XENYX-fueled mic inputs with channel Inserts, "one knob" compressors and 3-band Britishstyle EQs with a sweepable, semi-parametric mid frequency band. The four stereo line-level channels offer enhanced fine-tuning via 4-band EQ, which is extremely handy for adjusting critical keyboard midrange frequencies. Aux 1 Sends are switchable (pre- or post-fader) and individual channels can be assigned to two subgroups for mixing flexibility. X1622USB Front Panel ¼" balanced/ unbalanced input Gain control adjusts input signal level High EQ ±15 dB, centered @ 12 kHz Mid Frequency, variable 100 Hz - 8 kHz Aux Sends for Monitors (pre/post) and FX Mute switch removes signal from Main Mix Mute & Clip LEDs Solo & Sub/Main assignment switches Channel fader adjusts signal level in Main Mix Low Cut filter removes unwanted infrasonics Onboard FX processor, 16 presets, two parameter controls Compressor knob adjusts compression effect on channel Mid level ±15 dB, variable center frequency Low EQ ±15 dB, centered @ 80 Hz Aux Sends 1 & 2 with Solo switches Phones/CTRL Room source mixing matrix Sub 1-2 Left/Right assignment switches Pan control adjusts position of signal in stereo image Sub 1-2 faders Stereo Aux Returns 1 & 2 with additional routing options Phones/CTRL Room level control 12-tier VU meter with +48 V and Power LEDs VU meter mode switch Main Mix faders