Beko ASGP342 User Manual - Page 12

Installation 3.6. Connecting water hose to the product To connect the water hose to the product, follow the instructions below. 1. Remove the connector on the hose nozzle adaptor in the back of the product and run the hose through the connector. 3.7. Connecting to water mains (Optional) To use the product by connecting to the cold water mains, a standard 1/2" valve connector must be installed to the cold water mains in your home. If the connector is not available or if you are unsure, consult a qualified plumber. 1. Detach the connector (1) from the tap adaptor (2). 2. Push the water hose down tightly and connect to the hose nozzle adaptor. 33 22 1 1 2. Connect the tap adaptor to the water mains valve. 3. Tighten the connector manually to fix on the hose nozzle adaptor. You may also tighten the connector using a pipe wrench or pliers. 3. Attach the connector around the water hose. 4. Connect the other end of the hose to the water mains (See Section 3.7) or, to use carboy, to the water pump (See Section 3.8). Refrigerator / User Guide 11 / 42 EN