Beko BCFD473 Owners Manual - Page 7

Transportation Instructions

Get Beko BCFD473 PDF manuals and user guides View all Beko BCFD473 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

TRANSPORTATION INSTRUCTIONS 1. The appliance should be transported only in a vertical upright position. The packing as supplied must be intact during transportation. 2. If transported horizontally, leave to stand upright for at least 4 hours before switching on, to allow compressor oil to settle. 3. Failure to comply with the above instructions could result in damage occurring to the appliance. The manufacturer will not be held responsible if these instructions are disregarded. 4. The appliance must be protected against rain, moisture and other atmospheric influences. 5. When positioning your appliance take care not to damage your flooring, kitchen furniture, related parts and doors, pipes, wall coverings etc. Do not move the appliance by pulling by the door. 6. Empty any water in the drain tray before moving. See section 'Defrosting' and 'Cleaning and care' for further information. 7. Make sure that the defrost water pipe at the back of the product is fixed to the plastic evaporating pan on the top of the compressor, to avoid defrost water spillage on the floor. IMPORTANT: Care must be taken while cleaning / carrying the appliance to avoid touching the bottom of the condenser metal wires at the back of the appliance as you might injure your fingers and hands. Do not attempt to sit or stand on top of your appliance as it is not designed for such use. You could injure yourself or damage the appliance. IMPORTANT: Make sure that mains cable is not caught under the appliance during and after carrying / moving the appliance, to avoid the mains cable becoming cut or damaged. Do not allow children to play with the appliance or tamper with the controls. Beko plc declines to accept any liability should the instructions not be followed. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
TRANSPORTATION INSTRUCTIONS
1.
The appliance should be transported only in a vertical upright position. The
packing as supplied must be intact during transportation.
2.
If transported horizontally, leave to stand upright for at least
4
hours before
switching on, to allow compressor oil to settle.
3.
Failure to comply with the above instructions could result in damage occurring to
the appliance. The manufacturer will not be held responsible if these instructions
are disregarded.
4.
The appliance must be protected against rain, moisture and other atmospheric
influences.
5.
When positioning your appliance take care not to damage your flooring, kitchen
furniture, related parts and doors, pipes, wall coverings etc. Do not move the
appliance by pulling by the door.
6.
Empty any water in the drain tray before moving. See section ‘Defrosting’ and
‘
C
leaning
and care
’ for further information.
7.
Make sure that the defrost water pipe at the back of the product is fixed to the
plastic evaporating pan on the top of the compressor, to avoid defrost water
spillage on the floor.
IMPORTANT:
Care must be taken while cleaning / carrying the appliance to avoid
touching the bottom of the condenser metal wires at the back of the appliance as
you might injure your fingers and hands.
Do not attempt to sit or stand on top of your appliance as it is not designed for such
use. You could injure yourself or damage the appliance.
IMPORTANT:
Make sure that mains cable is not caught under the appliance during
and after carrying / moving the appliance, to avoid the mains cable becoming cut or
damaged.
Do not allow children to play with the appliance or tamper with the controls.
B
eko
plc
declines to accept any liability should the instructions not be followed.
4