Beko BDVC665MK User Manual - Page 12

Installation - cooker

Get Beko BDVC665MK PDF manuals and user guides View all Beko BDVC665MK manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Installation P oduct must be installed by a qualified person in accordance with the regulations in force. The manufacturer shall not be held responsible for damages arising from procedures carried out by unauthorized persons which may also void the warranty. E Preparation of location and electrical installation for the product is under customer's responsibility. 65 trim min ==7 El 65 mm rain DANGER: The product must be installed in accordance with all local electrical regulations. • It can be used with cabinets on either side DANGER: Prior to installation, visually check if the but in order to have a minimum distance of 400mm above hotplate level allow a side clearance of 65mm between the appliance product has any defects on it. If so, do not have it installed. Damaged products cause risks for your safety. and any wall, partition or tall cupboard. • It can also be used in a free standing position. Allow a minimum distance of 650 mm above the hob surface. Before installation • (*) If a cooker hood is to be installed above To ensure that critical air gaps are maintained the cooker, refer to cooker hood under the appliance, we recommend that this manufacturer' instructions regarding appliance is mounted on a solid base and that the feet do not sink into any carpet or soft installation height (min 650 mm). • Movement of your appliance is most easily flooring. achieved by lifting the front as follows and The kitchen floor must be able to carry the pulling towards. Open the top oven door and weight of the appliance plus the additional weight the bottom oven door sufficiently to allow a of cookware and bakeware and food. comfortable grip on the underside front edge of the oven roofs. While gripping, it should be avoided to damage any grill elements or oven interior furniture. • The appliance corresponds to device class 1, i.e. it may be placed with the rear and one side to kitchen walls, kitchen furniture or equipment of any size. The kitchen furniture or equipment on the other side may only be of the same size or smaller. • Any kitchen furniture next to the appliance must be heat-resistant (100 °C min.). 12/EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
Installation
P
oduct
must
be
installed
by
a
qualified
person
in
accordance
with
the
regulations
in
force.
The
manufacturer
shal
l
not
be
held
responsible
for
damages
arising
from
procedures
carried
out
by
unauthorized
persons
which
may
also
void
the
warranty.
Preparation
of
location
and
electrical
installation
for
the
product
is
under
customer's
responsibility.
DANGER:
The
product
must
be
installed
in
accordance
with
all
local
electrical
regulations.
DANGER:
Prior
to
installation,
visually
check
if
the
product
has
any
defects
on
it.
If
so,
do
not
have
it
installed.
Damaged
products
cause
risks
for
your
safety.
Before
installation
To
ensure
that
critical
air
gaps
are
maintained
under
the
appliance,
we
recommend
that
this
appliance
is
mounted
on
a
solid
base
and
that
the
feet
do
not
sink
into
any
carpet
or
soft
flooring.
The
kitchen
floor
must
be
able
to
carry
the
weight
of
the
appl
iance
plus
the
additional
weight
of
cookware
and
bakeware
and
food.
65
trim
min
==7
E
El
65
mm
rain
•
It
can
be
used
with
cabinets
on
either
side
but
in
order
to
have
a
minimum
distance
of
400mm
above
hotplate
level
allow
a
side
clearance
of
65mm
between
the
appl
iance
and
any
wall
,
partition
or
tal
l
cupboard.
•
It
can
also
be
used
in
a
free
standing
position.
Allow
a
minimum
distance
of
650
mm
above
the
hob
surface.
•
(*)
If
a
cooker
hood
is
to
be
installed
above
the
cooker,
refer
to
cooker
hood
manufacturer'
instructions
regarding
installation
height
(min
650
mm).
•
Movement
of
your
appliance
is
most
easily
achieved
by
lifting
the
front
as
follows
and
pull
ing
towards.
Open
the
top
oven
door
and
the
bottom
oven
door
sufficiently
to
al
low
a
comfortable
grip
on
the
underside
front
edge
of
the
oven
roofs.
While
gripping,
it
should
be
avoided
to
damage
any
gril
l
elements
or
oven
interior
furniture.
•
The
appl
iance
corresponds
to
device
class
1,
i.e.
it
may
be
placed
with
the
rear
and
one
side
to
kitchen
wal
ls,
kitchen
furniture
or
equipment
of
any
size.
The
kitchen
furniture
or
equipment
on
the
other
side
may
only
be
of
the
same
size
or
smal
ler.
•
Any
kitchen
furniture
next
to
the
appliance
must
be
heat
-resistant
(100
°C
min.).
12/EN