Beko BLSD4V577 Owners Manual - Page 11

Before operating

Page 11 highlights

4 Before operating Final Check Before you start using the appliance check that: 1. The interior is dry and air can circulate freely at the rear of the cabinet. 2. Clean the interior as recommended under "Maintenance and cleaning". 3. Insert the plug into the wall socket and switch on the electricity supply. • When the door is open the fridge interior light will come on. 4. You will hear a noise as the compressor starts up. The liquid and gases sealed within the refrigeration system may also give rise to noise, whether the compressor is running or not which is quite normal. 5. Front edges of the cabinet may feel warm. This is normal. These areas are designed to be warm to avoid condensation. 6. Do not load the appliance immediately it is switched on. Wait until the correct storage temperature has been reached. We recommend that you check the temperature with an accurate thermometer. 10 | EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

4
Before operating
Final Check
Before you start using the
appliance check that:
1.
The interior is dry and air can
circulate freely at the rear of the
cabinet.
2.
Clean the interior as recommended
under “
Maintenance and cleaning
”.
3.
Insert the plug into the wall socket
and switch on the electricity supply.
• When the door is open the fridge
interior light will come on.
4.
You will hear a noise as the
compressor starts up. The liquid and
gases sealed within the refrigeration
system may also give rise to noise,
whether the compressor is running or
not which is quite normal.
5.
Front edges of the cabinet may feel
warm. This is normal. These areas are
designed to be warm to avoid
condensation.
6.
Do not load the appliance immediately
it is switched on. Wait until the correct
storage temperature has been reached.
We recommend that you check the
temperature with an accurate
thermometer.
10
|
EN