Beko BRIC21000 User Manual - Page 20
Removing, inner, glass, Replacing
View all Beko BRIC21000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Removing the door inner glass The inner glass panel of the oven door can be removed for cleaning. Open the oven door. 2 1 Frame 2 Plastic part Pull towards yourself and remove the plastic part installed to upper section of the front door. 1 A When installing the inner glass panel (1), make sure that the printed side of the panel faces towards the inner. It is important to seat lower corner of inner glass panel into the lower plastic slot. Push the plastic part towards the frame until you hear a "click". Replacing the oven lamp ADANGER: Before replacing the oven lamp, make sure that the product is disconnected from mains and cooled down in order to avoid the risk of an electrical shock. Hot surfaces may cause burns! The oven lamp is a special electric light bulb that can resist up to 300 °C. See Technical specifications, page 9 for details. Oven lamps can be obtained from Authorised Service Agents or technician with licence. Position of lamp might vary from the figure. 3 12 1 Inner glass panel 2 Outer glass panel 3 Plastic glass panel slot-Lower As illustrated in figure, raise the innermost glass panel (1) slightly in direction A and pull it out in direction B. If your oven is equipped with a round lamp: 1. Disconnect the product from mains. 2. Turn the glass cover counter clockwise to remove it. 20/EN 3. Remove the oven lamp by turning it counter clockwise and replace it with the new one. 4. Install the glass cover.