Beko CEG5311 Owners Manual - Page 19

Troubleshooting

Get Beko CEG5311 PDF manuals and user guides View all Beko CEG5311 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

6 Troubleshooting Problem The appliance does not work. Cause The appliance is not connected to the mains. Solution Plug in and press the switch. Check the cable and the Plug No or delayed response in several trials of Appliance is under an electromagnetic Unplug the appliance. Restart after few pressing on function key on the panel interference minutes Clean the panel with the cloth Dirt over the panel provided The coffee is not hot enough. The cups have not been preheated. The brewing unit is too cold. Rinse the appliance at least 3 times before making the coffee. The coffee cannot come out from spout. Empty system function maybe used before. Press the hot water button until water can come out from spout. The first cup of coffee is poor quality. The touch buttons are not sensitive The first run of grinder does not pour Throw the coffee away. The other coffees sufficient quantity coffee power into the will always be of good quality. brewing unit. Excessive scale has built up. Descale the appliance. The water tank is removed / the water level The area near the water is very low in the water tank but have no tank connector is wet. alert. Wipe the water around the water tank connector Internal drip tray is filled with a lot of water. Coffee powder too fine which block the water Adjust the coffee fineness to bigger dot to come out. during grinder operation. Coffee is delivered too slowly or a drop at a Coffee powder too fine which block the water Adjust the coffee fineness to bigger dot time. to come out. during grinder operation. Lack of bean indicator flashes but there is still Internal coffee powder outlet is blocked. a lot of coffee bean inside the container. To follow the steps of section E (V. Cleaning coffee powder outlet). The brewer or the coffee ground tray is The appliance did not finish the self-cleaning Please switch on the machine again and let it impossible to remove. process and was switched off . finish its auto cleaning process. Fully Automatic Coffee Machine / User Manual 19 / EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
19 / EN
Fully Automatic Coffee Machine / User Manual
6
Troubleshooting
Problem
Cause
Solut±on
The appliance does not work.
The appliance is not connected to the mains.
Plug in and press the switch. Check the cable
and the Plug
No or delayed response in several trials of
pressing on function key on the panel
Appliance
is
under
an
electromagnetic
interference
Dirt over the panel
Unplug the appliance. Restart after few
minutes Clean the panel with the cloth
provided
The coffee is not hot enough.
The cups have not been preheated.
The brewing unit is too cold.
Rinse the appliance at least 3 times before
making the coffee.
The coffee cannot come out from spout.
Empty system function maybe used before.
Press the hot water button until water can
come out from spout.
The first cup of coffee is poor quality.
The first run of grinder does not pour
sufficient quantity coffee power into the
brewing unit.
Throw the coffee away. The other coffees
will always be of good quality.
The touch buttons are not sensitive
Excessive scale has built up.
Descale the appliance.
The water tank is removed / the water level
is very low in the water tank but
have no
alert.
The area near the water
tank connector is wet.
Wipe the water around the water tank
connector
±nternal drip tray is filled with a lot of water.
Coffee powder too fine which block the water
to come out.
Adjust the coffee fineness to bigger dot
during grinder operation.
Coffee is delivered too slowly or a drop at a
time.
Coffee powder too fine which block the water
to come out.
Adjust the coffee fineness to bigger dot
during grinder operation.
Lack of bean indicator flashes but there is still
a lot of coffee bean inside the container.
±nternal coffee powder outlet is blocked.
To follow the steps of section E (V. Cleaning
coffee powder outlet).
The brewer or the coffee ground tray is
impossible to remove.
The appliance did not finish the self-cleaning
process and was switched off .
Please switch on the machine again and let it
finish its auto cleaning process.