Beko CF5713AP User Manual - Page 6
Warning
View all Beko CF5713AP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
3. Do not place the appliance near cookers, radiators or in direct sunlight as this will cause your appliance to work harder. If installed next to a source of heat or freezer, maintain the following minimum side clearances: From Cookers From Radiators From Refrigerators or Larder Fridge 2" (50 mm) 12" (300 mm) 1" (25 mm) 4. Make sure that sufficient room is provided around the appliance to ensure free air circulation. Fit the two plastic wall spacer supplied with the appliance rotating 1/4 turn to the condenser at the back of the refrigerator (see diagram). CONDENSER SPACERS 5. The fridge/freezer should be located on a smooth surface. The two front feet can be adjusted as required. To ensure that, your appliance is standing upright adjust the two front feet by turning clockwise or anti-clockwise, until the product is in firm contact with the floor. Correct adjustment of feet avoids excessive vibration and noise. 6. Refer to cleaning and care section to prepare your appliance for use. WARNING! Do not connect your appliance to the electricity supply until all the packing and transit protectors have been removed including polystyrene block(s) inserted between the compressor motor and the cabinet (see diagrams). Do not remove the plastic drain tray fitted above the compressor motor on models with auto - defrost fridge. COMPRESSOR 7. To take out the baskets from the freezer compartment please proceed as in item: 200 1 2 3 5