Beko CFD7914AP User Manual - Page 19

tank. Clean the water tank with warm pulling towards yourself.Then clean clean water, reinstall the top cover drip housing by a fabric or sponge that mechanism and fasten the latches. has water absorbtion tendency. When installing the water tank, make sure that hooks behind it fits securely into the hangers on the door. Make sure that parts removed during cleaning (if any) are installed correctly into their original locations. Otherwise, water may leak. Important: Water tank and components of water dispenser are not dishwasher-proof. Safety lock for Water Dispenser You may use the lock in order to avoid small children tampering with the water dispenser. To do this, slide the locking latch from left to right as illustrated in the figure. You must slide the latch back to left position in order to use the water dispenser. To avoid accidental water dispensing, we recommend you to lock the water dispenser. Water tray Water that drips while using the water dispenser accumulates in the drip tray housing.Remove the drip tray firstly pressing up from the front edge then UNLOCK LOCK Maximum height of glass suitable for use with Stored Water Dispenser is 16 cm which includes most of the "Standard" pint glasses. 18 EN