Beko CFG1582 User Manual - Page 7

Electrical requirements from a Beko authorised service agent. Before you insert Warning! This the plug into the wall appliance must be socket make sure that earthed the voltage and the frequency shown on the rating plate inside the appliance corresponds to your electricity supply. Rating label is on the left hand side of fridge inner liner. We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket. The appliance must be positioned so that the plug is accessible. If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted. Destroy the old plug which is cut off as a plug with bared cord could cause a shock hazard if inserted into a socket elsewhere in the house. The moulded plug on this appliance incorporates a 13 A fuse. Should the fuse need to be replaced WARNING: an ASTABEAB approved When positioning the BS 1362 fuse of the same appliance ensure the rating must be used. Do supply cord is not trapped not forget to refit the or damaged. fuse cover. In the event of Should the mains lead losing the fuse cover the of the appliance become plug must not be used damaged or should it until a replacement fuse need replacing at any cover has been fitted. time, it must be replaced by a special purpose made mains lead which can only be obtained 7 EN