Beko CXFG1685 User Manual - Page 14

Installation Instructions 1. Fitted the two plastic wall spacers supplied onto the condenser at the back of the appliance by rotating 1/4 turn. appliance. In case of transportation, ensure you locate the plug in the receptacle provided to avoid transit damage. 5. The space in the room where the appliance is installed must not be smaller than 10 cubic metres. 6. Install in room +5C to +32C . 2. Locate the appliance on a smooth surface. 3. To ensure it is standing upright adjust the two front feet by turning clockwise or anti-clockwise, until it is in firm contact with the floor. Correct adjustment of feet avoids excessive vibration and noise. 4. A special receptacle is supplied to store the mains plug during transit. The receptacle is fixed at the back of the cabinet on the side of the compressor. Gently remove the plug from the receptacle. Never pull the mains cord, you may damage the Changing the illumination lamp To change the Bulb/LED used for illumination of your refrigerator, call your Authorized Service. The lamp(s) used in this appliance is not suitable for household room illumination. The intended purpose of this lamp is to assist the user to place foodstuffs in the refrigerator/freezer in a safe and comfortable way. Plug receptacle 14 EN