Beko DCJ83133 User Manual - Page 24

6.11 Starting the Programme Start the Programme by pressing the Start / Pause button. Start/Pause led and the Drying led light up, indicating the Programme started. The ":" sign in the middle of the remaining duration starts to blink. 6.12 Child Lock The machine features a child lock which prevents the machine Programme flow from being affected when buttons are pressed during operation. When the Child Lock is active, all buttons except for the On/Off button are deactivated. To activate the child lock, press the Sound Notification button and End Duration button simultaneously for 3 seconds. Te child lock should be deactivated to be able to start a new Programme after the current Programme ends or to be able to interfere with the current Programme. Keep the same buttons pressed for 3 seconds again to deactivate the child lock. C The lock led on the screen lights up when the Child Lock is activated. C Child Lock deactivates when the machine is turned off and on again using the On/ Off button. A warning sound is heard when any button is pressed (except for On/Off button) or the Programme Selection knob is turned while the child lock is active. 6.13 Changing the Programme after it is started After the machine starts running, you can change the Programme you selected to dry your laundry with a different Programme. 1. For example, to select Extra Dry Programme instead of the Iron Dryness, stop the Programme by pressing the Start / Pause button. 2. Turn the Programme Selection knob to select the Extra Dry Programme. 3. Start the Programme by pressing the Start / Pause button. Adding and removing laundry in stand-by mode If you want to add or remove laundry after the drying Programme starts: 1. Press the Start/Pause button to take the machine into Stand-by mode. Drying operation stops. 2. Open the loading door, add or remove laundry and close the loading door. 3. Start the Programme by pressing the Start / Pause button. C The laundry adding made after the drying operation started may cause the dried laundry inside the machine to mix with the wet laundry and the laundry to remain damp after the operation ends.. C Laundry adding and removing can be repeated as much as desired during drying operation. But this process would continuously interrupt the drying operation, and so would cause the Programme duration to lengthen and increase energy consumption. Thus, it is recommended to add laundry before the Programme starts. C If a new Programme is selected by changing the position of the Programme selection knob while your machine is in stand-by mode, the running Programme ends. Do not contact the inner surface of the drum when adding or removing laundry during a continuing Programme. The drum surface is hot. EN 24 / 36 Dryer / User Manual