Beko DCX83100 User Manual - Page 29
Troubleshooting
View all Beko DCX83100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
8 Troubleshooting Drying process lasts for a long time. • Pores of the fibre filter might be clogged. >>> Wash the filter with warm water. • Condenser might be clogged. >>> Wash the condenser. • Ventilation grills at the front of machine might be blocked. >>> Remove any items in front of the ventilation grills that block ventilation. • Ventilation might be inadequate if the installation area is very small. >>> Open the windows and doors in order to prevent excessive increase in room temperature. • There might be furring on the damp sensor. >>> Clean the damp sensor. • Laundry might be overloaded. >>> Do not overload the tumble drier. • Laundry might not have been adequately spun. >>> Increase the rpm of tumble drier. Laundry is still wet at the end of drying. C Hot laundry unloaded at the end of drying feel wetter than they really are. • You may not have used a programme suitable for laundry type.>>> Check the maintenance labels on the laundry and select a programme suitable for their type, or use the time programmes additionally. • Pores of the fibre filter might be clogged. >>> Wash the filter with warm water. • Condenser might be clogged. >>> Wash the condenser. • Laundry might be overloaded. >>> Do not overload the tumble drier. • Laundry might not have been adequately spun. >>> Increase the rpm of tumble drier. Tumble drier does not turn on or programme cannot be started. Tumble drier does not activate when set. • The power cord might not be plugged in. >>> Make sure the power cord is plugged in. • Loading door might be open. >>> Make sure that the loading door is properly closed. • You may not have set the programme or pressed the Start/Pause button. >>> Make sure that you have set the programme and it is not in Pause position. • Child lock might be active. >>> Disable the child lock. Programme was interrupted for no reason. • Loading door might not be properly closed. >>> Make sure that the loading door is properly closed. • A power cut might have occurred. >>> Press the Start/ Pause button to start the programme. • Water tank might be full. >>> Drain the water tank. Laundry is shrunk, damaged or worn out. • You may not have used a programme suitable for laundry type. >>> Check the maintenance labels on the laundry and select a programme suitable for their type. The lighting inside the tumble drier does not turn on. (In models with lamps) • You may not have turned on the tumble drier be using On/Off/Cancel button. >>> Make sure that the tumble drier is at 'on' position. • Lamp might be broken. >>> Contact the Authorized Service for the replacement of lamp. Filter cleaning warning led is on. • Fibre filter might not have been cleaned. >>> Clean the filter. Filter cleaning warning led flashes. • Filter bearing might be clogged with fibre. >>> Clean the filter bearing. • There might be a layer in the filter pores that causes clogging. >>> Wash the filter with warm water. • Condenser might be clogged. >>> Wash the condenser. Water is leaking from the condenser cover. • There might be fibre build-up inside the loading door and on the surfaces of loading door gasket. >>> Clean the inner surfaces of loading door and surfaces of loading door gasket. Dryer / User Manual EN 29 / 36