Beko DEN48X20 Owners Manual - Page 16
Adding salt
View all Beko DEN48X20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Preparation If the hardness level of the supply water is above 90 °dF or if you are using well water, then it is recommended to use water purification devices and special filters. If the hardness level of the supply water is below 13°dF, there is no need to use salt in your dishwasher. If this is the case, "No Salt Warning Indicator" (if any) illuminates C Salt reservoir will be filled with water when you start the product. For this reason, add salt before operating the machine. 1. Firstly, take the lower basket out to add softening salt. continuously on the panel of your machine. If the water hardness level adjustment is set to level 1, the "No salt warning indicator" will 2. Turn the salt reservoir lid counterclockwise to open it (A). illuminate continuously although it is not necessary to use salt. If you use salt under this condition, salt will not be consumed and the Salt indicator will not illuminate. C If you move your house, it is necessary to readjust water hardness level of your machine by considering the information given above according to the hardness level of the supply water in your new location. Your machine will display the most recently adjusted water hardness level. Adding salt 3. Add 1 litre of water to salt reservoir of your machine only in initial use. 4. Fill the salt reservoir with salt by using the salt funnel (D). To speed up dissolution rate of salt in water, stir it with a spoon. Water softening system needs to be regenerated in order for the product operates with the same performance continuously. Dishwasher salt is used for this purpose. C Use only special softening salts produced particularly for the dishwashers in your machine. C It is recommended to use granule- or powder-formed softening salts in the water softening system. Do not use salts that do not completely dissolve in water such as table salt or rock salt. Otherwise the performance of the system may deteriorate in time. C You can put about 2 kg of softening salt into the salt reservoir. 5. Replace the lid and tighten it when the reservoir is full. 14 /45 EN Dishwasher / User's Manual