Beko DFC04210 User Manual - Page 14
Water Hardness Level Adjustment Table
View all Beko DFC04210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Preparation Test Strip a b c 1 second d e f Level 1 Level 2 Level 3 1 minute Level 4 Level 5 Level 6 No Lime Very low lime content Low lime content Medium lime content High lime content Very High lime content Remove the Let the water Fill a glass with test strip from flow from your tap water and its packing. tap for 1 minute. dip the test strip into water for 1 second. Take the test strip out of the water and shake it. Hold for Set the water hardness level of your dishwasher 1 minute. according to the result shown by the test strip. To Adjust the Water Hardness 1. Move the programme selection key to position 1 when the machine is turned off. 2. Press Start/Pause/Cancel button. 3. Press On/Off button while keeping the Start/Pause/Cancel button pressed to turn the machine on. Do not release the Start/Pause/Cancel button until "Water Hardness Level" set appears on the indicator of the machine (See. Water Hardness Level Adjustment Table). 4. The default "Water Hardness Level" will remain lit on the panel of the machine for about 5 seconds. Release the Start/Pause/Cancel button after the default "Water Hardness Level" appears. 5. To adjust the new Water Hardness Level, move the programme selection key to the position that is suitable for your water supply. (See. Water Hardness Level Adjustment Table) **Programme selection key rotates in 5 steps regardless of the number of the programme contained on the machine. 6. Press "Start/Pause/Cancel" key once to store the level you have selected. 7. Press the On/Off key to turn off your machine. Water Hardness Level Adjustment Table Level 1 0-5 0-4 0-8 Level 2 6-14 5-11 9-20 Level 3 15-21 12-17 21-30 Level 4 22-28 18-22 31-40 Level 5 29-42 23-34 41-60 Level 6 43-56 35-45 61-80 14 /33 EN Dishwasher / User's Manual