Beko DFC04C10 User Manual - Page 15

Preparation If the hardness level of the water that you use is above 80 °dF (French standard for water hardness) or if you are using well water, then it is recommended to use filter and water purification devices. If the hardness level of the water that you use is below 8°dF (French standard for water hardness), there is no need to use salt in your dishwasher. If this is the case, "No Salt Warning Indicator" (if any) illuminates continuously on the panel of your machine. If the water hardness adjustment is set to level 1, the "No salt warning indicator" will illuminate continuously although it is not necessary to use salt. If you use salt under this condition, salt will not be consumed and the lamp will not illuminate. A Do not put solvents into the detergent dispenser. There is the risk of explosion! Put the detergent into the detergent dispenser just before operating the machine as illustrated below. 1. Push the latch to right to open the detergent dispenser lid (A). A Detergent You can use powder or tablet detergent in the machine. C Only use in the machine the detergents produced particularly for use with dishwashers. We recommend you not to use detergents that contain chlorine and phosphate as they are harmful for the environment. C Contact the detergent producer if the dishes are wet and/or if you notice limescale spots particularly on glasses after the washing programme is over. 2. Put suggested amount of powder or tablet detergent in the dispenser. C Inside the detergent dispenser, there are level markings that help you use appropriate amount of detergent. When 2155ccmmbwd³³reiil1tmlecfrougnle,tndate2in.tFe54icrl0lmgdec³enmtte³drogisfepnetnusperto 15 cm³ or 25 cm³ level marks in the detergent dispenser according to fullness of the machine and/or soiling degree of the dishes (1). Adding detergent C Refer to the "Programme Table" to determine the correct amount of detergent for the selected programme. Dishwasher / User's Manual 15/34 EN