Beko DFN05R10 User Manual - Page 26

Half Load function, How to cancel the washing, Programme, Salt indicator, Rinse Aid indicator

Get Beko DFN05R10 PDF manuals and user guides View all Beko DFN05R10 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

Operating the product C Programme and auxiliary functions cannot be set/ changed after the programme has started. C Your machine performs water softening depending on the hardness level of the supply water. The total time can also change while the programme is running depending on the ambient temperature where your machine is installed, temperature of the supply water and amount of the dishes. A Pay attention not to open the door of the machine when it is running. If you need to open the door, safety system will stop your machine. There may be a rush of vapour when you open the door of your machine; be careful. Washing programme will resume running when you close the door. Half Load function It is used to operate the machine without loading it completely. 1. Load your dishes in the machine using top and bottom baskets 2. Turn the machine on. 3. After selecting the desired programme, press the Half Load key. Half Load indicator lights up. 4. Close your machine's door and press Start / Stop key. 24 /35 EN C With the Half Load function you can save both water and power while using the lower and upper baskets of the machine. C Half Load function may cause changes in the programme duration. How to cancel the washing Programme To cancel a programme while the machine is operating: Press start/stop key for 3 seconds. The machine will drain the water inside the machine for 45 seconds. The programme is cancelled when washing light goes off. Then, you can choose and start a new programme. C There might be residues of detergent or rinse aid left in the machine and / or on the pieces being washed depending on the step the programme you have cancelled was in. Salt indicator Please check the Salt Indicator on the panel to see whether there is adequate amount of softening salt in the dishwasher or not. You need to refill the salt reservoir with salt whenever salt warning indicator appears on the panel of your machine. Rinse Aid indicator Please check the Rinse Aid Indicator on the panel to see whether there is adequate amount of rinse aid in the dishwasher or not. You need to refill the rinse aid reservoir with rinse aid whenever rinse aid warning indicator appears on the panel of your machine. Dishwasher / User's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
24
Dishwasher / User’s Manual
/35 EN
Operating the product
C
Programme and auxiliary
functions cannot be set/
changed after the programme
has started.
C
Your machine performs water
softening depending on the
hardness level of the supply
water. The total time can also
change while the programme
is running depending on the
ambient temperature where
your machine is installed,
temperature of the supply
water and amount of the dishes.
A
Pay attention not to open the
door of the machine when it is
running. If you need to open the
door, safety system will stop
your machine. There may be a
rush of vapour when you open
the door of your machine; be
careful. Washing programme will
resume running when you close
the door.
Half Load function
It is used to operate the machine without
loading it completely.
1.
Load your dishes in the machine using
top and bottom baskets
2.
Turn the machine on.
3.
After selecting the desired programme,
press the Half Load key. Half Load
indicator lights up.
4.
Close your machine’s door and press
Start / Stop key.
C
With the Half Load function you
can save both water and power
while using the lower and upper
baskets of the machine.
C
Half Load function may cause
changes in the programme
duration.
How to cancel the washing
Programme
To cancel a programme while the machine
is operating:
Press start/stop key for 3 seconds. The
machine will drain the water inside the
machine for 45 seconds. The programme
is cancelled when washing light goes off.
Then, you can choose and start a new
programme.
C
There might be residues of
detergent or rinse aid left in the
machine and / or on the pieces
being washed depending on the
step the programme you have
cancelled was in.
Salt indicator
Please check the Salt Indicator on the panel
to see whether there is adequate amount
of softening salt in the dishwasher or not.
You need to refill the salt reservoir with salt
whenever salt warning indicator appears on
the panel of your machine.
Rinse Aid indicator
Please check the Rinse Aid Indicator on the
panel to see whether there is adequate
amount of rinse aid in the dishwasher or
not. You need to refill the rinse aid reservoir
with rinse aid whenever rinse aid warning
indicator appears on the panel of your
machine.