Beko DFN15R10 Owners Manual - Page 15

Preparation Remove the test Turn on the tap and Hold the test strip in Remove the test Wait for 1 minute. The test strip shows strip from the let the water run for the water for about strip from the water you the hardness packet. about a minute. a second. and shake it. level. After determining hardness level of the supply water: 1. Turn on the machine, press and hold Time Delay and Programme keys simultaneously for 3 seconds to enter the settings menu. 2. Press the programme key until the Salt indicator starts to flash. Current regeneration stage is displayed on the programme indicator. 3. Using Time Delay key, adjust water hardness level according to the hardness of the supply water. See "Water hardness level adjustment table" for correct setting. 4. Press On / Off key to save the setting. Water hardness level adjustment table Hardness Level English Water Hardness °dE German Water French Water Hardness °dH Hardness °dF Water Hardness Level Indicator 0th Level 0-5 1st Level 6-9 0-4 0-8 Press the Time Delay key to switch the water hardness level 5-7 9-13 to position P1. 2nd Level 3rd Level 4th Level 5th Level 10-15 16-19 20-24 25-62 8-12 13-15 16-19 20-50 14-22 23-27 28-34 35-90 Press the Time Delay key to switch the water hardness level to position P2. Press the Time Delay key to switch the water hardness level to position P3. Press the Time Delay key to switch the water hardness level to position P4. Press the Time Delay key to switch the water hardness level to position P5. In order to protect your glassware against glass corrosion in an optimal way, you have to perform the same hardness settings, which you have made in the control panel, with the regeneration setting switch. For example, if you have adjusted to "3rd level" in the control panel, also set the regeneration adjustment switch to 3rd level. Regeneration Adjustment Switch 0th Level 1st Level 2nd Level 3rd Level 4th Level 5th Level 1 1 2 3 4 5 Dishwasher / User's Manual 13/44 EN