Beko DFN16210 User Manual - Page 15
Detergent, Add²ng detergent
View all Beko DFN16210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Preparation C If you move your house, it is very important to make the water hardness level adjustment of your machine according to the new location you move in order to preserve the washing efficiency. If the water hardness level of your machine is adjusted previously, your machine will display the most recent hardness level adjustment. Adjust the new water hardness level of the machine based on the water hardness level of the tap water. C Since different salt brands in the market have different particle sizes and since the water hardness may vary, dissolution of the salt in water may take a couple of hours. Therefore, Salt Indicator remains on for a while after adding salt into the machine. Loose salt grains can cause rust marks in your machine if not rinsed away. Only fill salt just before a programme is run. C Contact the detergent producer if the dishes are wet and/or if you notice limescale spots particularly on glasses after the washing programme is over. Adding detergent C Refer to the "Programme Table" to determine the correct amount of detergent for the selected programme. A Do not put solvents into the detergent dispenser. There is the risk of explosion! Put the detergent into the detergent dispenser just before operating the machine as illustrated below. 1. Push the latch to right to open the detergent dispenser lid (A). A Detergent You can use powder or tablet detergent in the machine. C Only use in the machine the detergents produced particularly for use with dishwashers. We recommend you not to use detergents that contain chlorine and phosphate as they are harmful for the environment. Dishwasher / User's Manual 2. Put suggested amount of powder or tablet detergent in the dispenser. 25cm³ 15cm³ 1 2 5cm³ 15/38 EN