Beko DFN16430 Owners Manual - Page 14
Adjusting the feet, Connection to the drain, Electrical connection
View all Beko DFN16430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Connection to the drain Water discharge hose can directly be connected to the drain hole or sink's drainage. See the installation manual supplied with your machine for detailed information. Drain pipe must be connected to the sewage system and it should not be connected to any surface water. Adjusting the feet If the door of the product cannot be closed properly or if the product rocks when you push it slightly, then you need to adjust the feet of the product. Adjust the feet of the product as illustrated in the installation manual supplied with the product. Steam may escape if the door of the dishwasher is not adjusted properly. Hot steam may cause serious burns and injuries and damage your furniture. 14/EN max 1000 min 500 min 300 min 120 Electrical connection Connect the product to a grounded outlet protected by a fuse complying with the values in the "Technical specifications" table. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations. • Connection must comply with national regulations. • Power cable plug must be easily accessible after installation. • Plug in the product to a grounded socket which is protected by a fuse of 16 Amperes. • The specified voltage must be equal to your mains voltage. Do not make connections via extension cables or multi-plugs. Damaged power cables must be replaced by the authorised service agent. This appliance must be earthed. If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted. Destroy the old plug, which is cut off as a plug with a bared cord could cause a shock hazard if inserted into a socket elsewhere in the house. The moulded plug on this appliance incorporates a 13A fuse. Should the fuse need to be replaced an ASTA approved BS1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover, the plug must not be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the