Beko DFN28R22 Owners Manual - Page 15

Preparation a b 1 min. c d 1 Second e f 1 Minute Remove the test Turn on the tap and Hold the test strip in Remove the test Wait for 1 minute. The test strip shows strip from the let the water run for the water for about strip from the water you the hardness packet. about a minute. a second. and shake it. level. After determining hardness level of the supply water: 1. Turn on the machine, press Time Delay and P+/P keys simultaneously. After the countdown (3,2,1) is displayed keep the keys pressed for a while. 2. Press P+/P key to activate the (r..) position. 3. Using Time Delay key, adjust water hardness level according to the hardness of the supply water. See "Water hardness level adjustment table" for correct setting. 4. Press On / Off key to save the setting. Water hardness level adjustment table Hardness Level 0th Level 1st Level 2nd Level 3rd Level 4th Level 5th Level English Water Hardness °dE German Water French Water Hardness °dH Hardness °dF Water Hardness Level Indicator 0-5 6-9 10-15 16-19 20-24 25-62 0-4 5-7 8-12 13-15 16-19 20-50 0-8 9-13 14-22 23-27 28-34 35-90 Press the Time Delay key to switch the water hardness level to position 1. (r1) Press the Time Delay key to switch the water hardness level to position 2. (r2) Press the Time Delay key to switch the water hardness level to position 3. (r3) Press the Time Delay key to switch the water hardness level to position 4. (r4) Press the Time Delay key to switch the water hardness level to position 5. (r5) Perform the same hardness level adjustment that you have set on the control panel also with the regeneration adjustment switch. For example, if you have adjusted to "3rd level" in the control panel, also set the regeneration adjustment switch to 3rd level. Regeneration Adjustment Switch 0th Level 1st Level 2nd Level 3rd Level 4th Level 5th Level 1 1 2 3 4 5 Dishwasher / User's Manual 13/41 EN