Beko DFN28R30 User Manual - Page 29
Start²ng the programme
View all Beko DFN28R30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Operating the product the end of the period. Time Delay is displayed on the Display Information Line. Selected programme will start as soon as the countdown is over. Changing the settings while Time Delay function is enabled While the Time Delay function is activated, you cannot make changes in the washing programme, auxiliary functions or the duration of delay time. C Programme and auxiliary functions cannot be set/changed after the programme has started. To cancel the Time Delay function 1. Press and hold Start / Pause / Cancel key for 3 seconds. 2. When the Start / Pause / Cancel key is pressed and hold, "3", "2", "1" appear on the Display Information Line. Time Delay indicator will turn off at the end of the cancellation process and delaying process is cancelled. C You can select and start a new programme following the cancellation of Time Delay function. C Time Delay function can not be set after the programme starts. Starting the programme To start your machine after selecting the programme and auxiliary functions, press Start / Pause / Cancel key. Once the programme starts a tune is played and the estimated time remained to the end of the programme will appear on the Display Information Line. Start / Pause / Cancel indicator starts lighting continuously. C Your machine performs water softening depending on the hardness level of the supply water. Remaining time displayed towards the end in some programmes can be different from the time indicated at the beginning due to this process. The total time can also change while the programme is running depending on the ambient temperature where your machine is installed, temperature of the supply water and amount of the dishes. C Pay attention not to open the door of the machine when it is running. Stop the machine by pressing Start / Pause / Cancel key if you have to open the door. Then, open the door of the machine. There may be a rush of vapour when you open the door of your machine; be careful. Close the door of your machine and press Start/Pause/ Cancel key again. Programme will resume running. C The machine will remain silent in pause mode for some time in order to remove the water in the machine and on the dishes completely and to have the water softener cleaned, and then it will resume running in drying mode. 28 /40 EN Dishwasher / User's Manual