Beko DFN28R31 User Manual - Page 30

Operating the product 2. Press P+ key to activate the a: option. Automatic detergent detection feature is disabled at "a:0" option and enabled at "a:1" option. Set the desired option by pressing the Time Delay key. 3. Turn off the machine with On/Off key to save the changes. Programming the washing time Time Delay If an economical electricity tariff is applied in your region, you can use the Time Delay function to wash your dishes during appropriate hours. You can delay the start of the selected programme until 24 hours. Time Delay cannot be set after the programme starts. 1. Press the Time Delay function key after selecting the washing programme and other auxiliary functions. 2. Once you press the Time Delay key, Display Information Line will show "0:30" and Time Delay indicator will start flashing. 3. Set the desired time by pressing the Time Delay key. Time will increase with increments of 30 minutes up to 6 hours and after that in 1 hour increments up to 24 hours every time you press the key. 4. Press Start / Pause / Cancel key to start countdown for the Time Delay. Time Delay indicator and Start / Pause indicator will light continuously until the end of the period. Time Delay is displayed on the Display Information Line. Selected programme will start as soon as the countdown is over. Changing the settings while Time Delay function is enabled While the Time Delay function is activated, you cannot make changes in the washing programme, auxiliary functions or the duration of delay time. C Programme and auxiliary functions cannot be set/ changed after the programme has started. To cancel the Time Delay function 1. Press and hold Start / Pause / Cancel key for 3 seconds. 2. When the Start / Pause / Cancel key is pressed and hold, "3", "2", "1" appear on the Display Information Line. Time Delay indicator will turn off at the end of the cancellation process and delaying process is cancelled. C You can select and start a new programme following the cancellation of Time Delay function. C Time Delay function can not be set after the programme starts. Starting the programme To start your machine after selecting the programme and auxiliary functions, press Start / Pause / Cancel key. Once the programme starts a tune is played and the estimated time remained to the end of the programme will appear on the Display Information Line. Start / Pause / Cancel indicator starts lighting continuously. 28 /42 EN Dishwasher / User's Manual