Beko DHX93460 Owners Manual - Page 15
Starting the program, 10 Child Lock, 11 Changing the program after it is, started
View all Beko DHX93460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Canceling the end duration function If you want to cancel the end duration setting countdown and start the program right away: 1. Cancel the program by pressing the On/ Off button. Turn on the drying machine again by pressing the On/Off button. When your drying machine turns on for the first time, it turns on with the declaration (cotton wardrobe dryness) program. 2. Select the program you desire using the Program Selection knob. 3. Start the program by pressing the Start / Pause button. 5.9 Starting the program Start the program by pressing the Start / Pause button. Start/Pause led and the Drying led light up, indicating the program started. The ":" sign in the middle of the remaining duration starts to blink. 5.10 Child Lock The machine features a child lock which prevents the machine program flow from being affected when buttons are pressed during operation. When the Child Lock is active, all buttons except for the On/Off button are deactivated. To activate the child lock, press the Sound Notification button and End Duration button simultaneously for 3 seconds. Te child lock should be deactivated to be able to start a new program after the current program ends or to be able to interfere with the current program. Keep the same buttons pressed for 3 seconds again to deactivate the child lock. C NOTE • The lock led on the screen lights up when the Child Lock is activated. • Child Lock deactivates when the machine is turned off and on again using the On/Off button. A warning sound is heard when any button is pressed (except for On/Off button) or the Program Selection knob is turned while the child lock is active. 5.11 Changing the program after it is started After the machine starts running, you can change the program you selected to dry your laundry with a different program. 1. For example, to select Extra Dry program instead of the Iron Dryness, stop the program by pressing the Start / Pause button. 2. Turn the Program Selection knob to select the Extra Dry program. 3. Start the program by pressing the Start / Pause button. Adding and removing laundry in stand-by mode If you want to add or remove laundry after the drying program starts: 1. Press the Start/Pause button to take the machine into Stand-by mode. Drying operation stops. 2. Open the loading door, add or remove laundry and close the loading door. 3. Start the program by pressing the Start / Pause button. C NOTE • The laundry adding made after the drying operation started may cause the dried laundry inside the machine to mix with the wet laundry and the laundry to remain damp after the operation ends. • If a new program is selected by changing the position of the program selection knob while your machine is in stand-by mode, the running program ends. • Laundry adding and removing can be repeated as much as desired during drying operation.But this process would continuously interrupt the drying operation, and so would cause the program duration to lengthen and increase energy consumption. Thus, it is recommended to add laundry before the program starts. Dryer / User Manual 15