Beko DHY9P46 Owners Manual - Page 15
Cnote! Cnote! Cnote! Cnote
View all Beko DHY9P46 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
C NOTE! • You can select this function before the program starts or after the program starts. Low temperature You can activate this function only prior to start of a program. You can activate this function if you want to dry your laundry at a lower temperature. The program duration will be longer after it becomes activated. End time You can delay the end time of the program up to 24 hours with end time function. 1.Open the loading door and place the laundry. 2.Select the drying program. 3.Press the End Time selection button and set the delay time you wish. End Time LED turns on. (When pressed and hold the button, End Time proceeds non-stop). 4.Press the Start / Stand-by button. End Time countdown begins. The ":" sign in the middle of displayed delay time flashes. C NOTE! • You can add or remove laundry within end time. Displayed time is the sum of normal drying time and end time. End Time LED turns off at the end of countdown, the drying starts and the drying LED turns on. Changing the end time If you want to change the duration during the countdown: Turn the On/Off/Program Selection button and cancel the program. Select the desired program and repeat the End Time selection. Cancelling the end time function If you want to cancel the end time countdown and start the program immediately: Turn the On/Off/Program Selection button and cancel the program. Select the desired program and press the "Start/Stand-by" button. Drum Light You can turn on and off the drum light by pressing this button. The light turns on when the button is pressed and turns off after certain time. 5.6 Warning indicators C NOTE! • Warning indicators may vary depending on the model of your drying machine. Filter cleaning When the program is completed, the warning indicator for filter cleaning turns on. Water tank If the water tank fills up while the program continues, the warning indicator starts flashing and the machine goes into stand-by. In this case, empty the water tank and start the program by pressing the Start / Stand-by button. Warning indicator turns off and program resumes. Cleaning of filter drawer/ heat exchanger Warning symbol flashes periodically to remind that filter drawer must be cleaned. 5.7 Starting the program Press the Start/Stand-by button to start the program. Start/Stand-by and Drying indicators turn on to show that program started. 5.8 Child Lock The drying machine has a child lock which prevents the program flow from being interrupted when the buttons are pressed during a program. When the Child Lock is activated, all buttons on the panel except the On/Off/Program Selection button are deactivated. Press the Audible Warning button for 3 seconds in order to activate the child lock. The child lock has to be deactivated to be able to start a new program after the current program is finished or to be able to interfere with the program. To deactivate the child lock, keep the same buttons pressed for 3 seconds. C NOTE! • When the child lock is activated, the child lock warning indicator on the screen turns on. Dryer / User Manual 15