Beko DIN26X21 User Manual - Page 19

Preparation Combined tablet detergents Combined tablet detergents exhibit water softening and / or rinse aid effect in addition to detergent effect. Some types of these detergents also contain specialpurpose washing chemicals such as glass and stainless steel protectors. Combined tablet detergents are available as 3in1, 5in1, Allin1 etc. They function only up to a specific degree of water hardness. Above this limit regeneration salt and rinse aid must be added. Refer to the instructions on the packaging of the combined detergent whether it is suitable for the hardness level of the water supply. C While using combined tablet detergents contact with the detergent producers if the dishes are wet and/or if you notice limescale spots particularly on glasses after the washing programme is over. C The best washing performance in dishwashers is obtained by using detergent, rinse aid and water softening salt individually. When you switch to powder, liquid/gel or tablet detergent from a combined tablet detergent: 1. Make sure that salt and rinse aid reservoirs are full. 2. Set the water hardness to the highest level and perform an empty run. 3. After the empty washing cycle, review the user manual and readjust the water hardness level so as to suit the water supply. 4. Make the appropriate rinse aid settings. C Depending on the model, salt indicator and/or rinse aid indicator must be enabled again if they were disabled before. Rinse aid C The rinse aid used in dishwashers is a special combination used to increase drying efficiency and prevent water or limescale stains on the washed items. For this reason, care must be paid to have rinse aid in the rinse aid reservoir and to use rinse aids produced specially for dishwashers only. 1. Open the lid of the rinse aid reservoir by pressing its latch (B). 2. Fill the reservoir until "MAX" level. Dishwasher / User's Manual 17/43 EN