Beko DIN28Q20 User Manual - Page 25

5 Operating the product 1 23 4 56 7 8 39 13 12 11 10 1. On/Off key 5. Salt indicator 2. Programme Selection / Programme Cancel (3 seconds) key 3. Function keys F1 Half Load Function F2 Fast+ Function F3 SteamGloss function F4 AquaIntense Function 4. Programme indicator 6. Not in use 7. Start / Cancel indicator 8. Time Delay / Programme Time indicator 9. Time Delay key 10. Time Delay indicator 11. End of Programme indicator 12. Not in use 13. Rinse Aid indicator Keys On/Off key When you press On / Off key, indicator lights illuminate on the display for ON position. The lights turn off in OFF position. Programme Selection / Programme Cancel key Press this key until the desired programme appears in the programme indicator. To cancel the running program, keep the Programme Selection /Programme Cancel key pressed for 3 seconds. Function keys If you press any of the Function keys during programme selection or time delay selection, an affirmative key signal will be heard provided that the relevant function is supported by the selected programme. Function will be deemed selected when the indicator of the selected function is lit. To cancel the selected function, keep the function key pressed until the function indicator disappears. 24 /39 EN Preparing the machine 1. Open the door of the dishwasher. 2. Place the dishes in accordance with the instructions in the user manual. 3. Make sure that the upper and lower impellers rotate freely. 4. Put adequate amount of detergent into the detergent dispenser. 5. Check if the Salt and Rinse Aid indicators light and add salt and/or rinse aid if needed. Programme selection 1. Press On/Off key to turn on your machine. 2. Refer to the table of "Programme data and average consumption values" to determine a washing programme suitable for your dishes. 3. Selected programme will start when you close the door of your machine. Dishwasher / User's Manual