Beko DIN28R22 Owners Manual - Page 19

Preparation if the water hardness level is above the mentioned level. C The best washing performance in dishwashers is obtained by using detergent, rinse aid and water softening salt individually. Rinse aid C The rinse aid used in dishwashers is a special combination that aims to increase drying efficiency and prevent water or lime stains on the washed items. For this reason, care must be paid to have rinse aid in the rinse aid reservoir and to use rinse aids produced specially for dishwashers only. 1. Open the lid of the rinse aid reservoir with the help of the latch. C Observe the instructions of the detergent manufacturer on the package when using tablet detergents. C Contact the detergent manufacturer if your dishes are wet and/or if you notice limescale spots particularly on your glasses after the washing programme is over when using a tablet detergent. When you switch to powder detergent from tablet detergent: 1. Make sure that salt and rinse aid reservoirs are full. 2. Set the water hardness to the highest level and perform an empty run. 3. After the empty washing cycle, review the user manual and readjust the water hardness level so as to suit the water supply. 4. Make the appropriate rinse aid settings. 2. Fill the reservoir until "MAX" level. 3. Slightly press the point (B) of the reservoir lid to close it. Dishwasher / User's Manual 17/44 EN