Beko DIS15010 User Manual

Beko DIS15010 Manual

Get Beko DIS15010 PDF manuals and user guides View all Beko DIS15010 manuals
Add to My Manuals
Save this manual to your list of manuals

Beko DIS15010 manual content summary:

  • Beko DIS15010 | User Manual - Page 1
    Dishwasher User's Manual DIS15010
  • Beko DIS15010 | User Manual - Page 2
    Follow all warnings and information in the user manual. Remember that this user manual is also applicable for several other models. Differences between models will be identified in the manual. Explanation of symbols Throughout this User Manual the following symbols are used: C Important information
  • Beko DIS15010 | User Manual - Page 3
    CONTENTS 1 INSTRUCTIONS FOR SAFETY AND DISHWASHER 7 Overview 7 Condensing Drying System 8 Technical specifications 8 3 INSTALLATION 9 Appropriate installation 23 Warning Sound and Inner Illumination Settings (Depends on model 24 6 MAINTENANCE AND CLEANING 26 Cleaning the outer surface
  • Beko DIS15010 | User Manual - Page 4
    instructions problems with your product. •• Do not operate the product if the power cable / plug is damaged! Call the Authorised Service installation, maintenance, cleaning and repairing procedures. •• Always have the repair procedures carried out by the Authorised Service Dishwasher / User's Manual
  • Beko DIS15010 | User Manual - Page 5
    of the product when leaving the room where it is located. Dishwasher / User's Manual •• Store all detergents and additives in a safe place away from Dispose of them properly and sort in accordance with recycled waste instructions. Do not dispose of them with normal domestic waste. Transportation
  • Beko DIS15010 | User Manual - Page 6
    InstructIons for safety and envIronment Compliance with of the waste product with normal domestic and other wastes at the end of its service life. Take it to the collection center for the recycling of electrical and electronic equipment by the local authorities. 6 /35 EN Dishwasher / User's Manual
  • Beko DIS15010 | User Manual - Page 7
    2 Dishwasher Overview 1. Upper impeller 2. Lower basket 3. Lower impeller 4. Filters 5. Rating Label 6. Control panel 7. Door 8. Detergent dispenser 9. Cutlery basket 10. Salt reservoir lid 11. Upper basket rail 12. Upper basket 13. Condensing Drying System Dishwasher / User's Manual 13 7/35 EN
  • Beko DIS15010 | User Manual - Page 8
    IEC 60436/DIN 44990, EN 50242 Power input Total power consumption Heater power consumption Total current (depends on the model) Drain pump power consumption Water pressure 220-240 V, 50 Hz (see rating label) 1800-2100 W (see rating the side wall of the door. 8 /35 EN Dishwasher / User's Manual
  • Beko DIS15010 | User Manual - Page 9
    water pressure exceeds 10 bars, a pressure relief valve should be installed in between. •• Open the tap completely after making the connections to check for water leaks. A For your safety, close the water inlet tap completely after the washing programme is over. Dishwasher / User's Manual 9/35 EN
  • Beko DIS15010 | User Manual - Page 10
    Installation Connection to the drain Water discharge Service Agent or a similarly qualified person. 0 10 20 30 40 50 60 70 80 90 100 110 Ø 21 Ø 18 C Drainpipe must be connected to the foul water system and it should not be connected to any surface water drain. 10 /35 EN Dishwasher / User's Manual
  • Beko DIS15010 | User Manual - Page 11
    the terminal in the plug marked 'N' or coloured black. Dishwasher / User's Manual 3. Connect the brown (live) wire to the terminal starting to use the product, make sure that all preparations are made in accordance with the instructions in sections "Important safety instructions" and "Installation
  • Beko DIS15010 | User Manual - Page 12
    reservoir will fill with water when you start the product. Therefore, add the softening salt before starting the machine. 1. First take the lower instruction in this booklet. Adding salt Water softening system needs to be regenerated in order that the product 12 /35 EN Dishwasher / User's Manual
  • Beko DIS15010 | User Manual - Page 13
    securely when the reservoir is full. 5. If you will not start a washing programme immediately after adding the salt, run the machine reset the water hardness in order to obtain optimum washing efficiency. C You can put about 2 kg of Dishwasher salt into the salt reservoir. Dishwasher / User's Manual
  • Beko DIS15010 | User Manual - Page 14
    hardness level stored on your machine is displayed in the program indicator. Start / Pause indicator will start flashing once the stored water hardness setting is displayed. 2. By using is no need to use salt in your dishwasher. If this is the case, "No Salt 14 /35 EN Dishwasher / User's Manual
  • Beko DIS15010 | User Manual - Page 15
    is run. C Only use in the machine the detergents produced particularly for use with dishwashers. We recommend you not to use detergents that contain chlorine and phosphate as they are Put suggested amount of powder or tablet detergent in the dispenser. Dishwasher / User's Manual 15/35 EN
  • Beko DIS15010 | User Manual - Page 16
    aid and water softening salt individually. C Information about suitable places (detergent dispenser, basket etc.) in the dishwasher to place the tablet can be found amongst the usage instructions on the packages of the tablet detergents. Tablet detergent types commonly found in the market: 16 /35
  • Beko DIS15010 | User Manual - Page 17
    instructions cycle, review the user manual and readjust the water hardness level so as to suit the water supply. 4. Make the appropriate rinse aid settings. C Depending on the model dishwashers only. Dishwasher / User's Manual 4 4. Turn the rinse aid amount adjuster manually
  • Beko DIS15010 | User Manual - Page 18
    and pointed dishes such as service fork, bread knife, etc. upside down so as their pointed ends will face down or they will lie horizontally in the dish basket. Unload dishes in the lower basket first and then the dishes in the upper basket. Upper basket rack 18 /35 EN Dishwasher / User's Manual
  • Beko DIS15010 | User Manual - Page 19
    Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Dishwasher / User's Manual 19/35 EN
  • Beko DIS15010 | User Manual - Page 20
    of different sizes. Push the latches back into the correct position. Height setting with empty basket In this model, the height setting of the upper basket may be changed using the wheels which are mounted at two back into the tracks at the desired height 20 /35 EN Dishwasher / User's Manual
  • Beko DIS15010 | User Manual - Page 21
    in the directions of arrows (B). To bring the wires back to vertical position, just lift them up. Collapsible wires will click into the latch again (C). Dishwasher / User's Manual 21/35 EN
  • Beko DIS15010 | User Manual - Page 22
    that the programme indicator lights come on. •• Check the salt and rinse aid level indicator lights before you start the machine. If necessary add salt and rinse aid. •• Select the required programme by referring to the warn you 10 times before it turns off. 22 /35 EN Dishwasher / User's Manual
  • Beko DIS15010 | User Manual - Page 23
    turn off when this function is activated. Time Delay Using the Delayed Start button, you may delay the starting time of your programme up to 9 hours . After delaying the start, press Start/Cancel button and close the door of your machine. Once the delay time Dishwasher / User's Manual 23/35 EN
  • Beko DIS15010 | User Manual - Page 24
    starts, the water remaining in your machine will be drained for 30 seconds due to safety reasons. Warning Sound and Inner Illumination Settings (Depends on model) - Inner illumination (OFF) Save the selected setting by pressing Start/Pause/Cancel key again. 24 /35 EN Dishwasher / User's Manual
  • Beko DIS15010 | User Manual - Page 25
    Operating the product Dishwasher / User's Manual Programme number Programme name Cleaning temperature Degree of Soiling Programme Table 1 2 3 4 5 Eco * Intensive Clean&Shine Quick&Clean Mini 30 50 ºC Most economical washing programme for
  • Beko DIS15010 | User Manual - Page 26
    6 Maintenance and cleaning Service life of the product extends and frequently faced problems decrease if it is cleaned at regular intervals. A Unplug the product and turn B1 2 1 B 3 3. BPull out the metal / plastic filter (3) from the seating (C). 3 C 3 C C 26 /35 EN Dishwasher / User's Manual
  • Beko DIS15010 | User Manual - Page 27
    that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter back to its seat in the hose. 4. Install the hose to tap. 1 A B (depends on model) C Dishwasher / User's Manual 27/35 EN
  • Beko DIS15010 | User Manual - Page 28
    clogged, remove and clean the impeller. Turn its nut to left to remove the upper impeller (A, B). Make sure that the nut is tightened well when installing the upper impeller. 1 A B C 28 /35 EN Dishwasher / User's Manual
  • Beko DIS15010 | User Manual - Page 29
    Troubleshooting Machine does not start. user manual. • Selected programme is unsuitable. >>> Select a programme with a higher temperature and cycle time. • Impellers are stuck. >>> Prior to starting are installed incorrectly. >>> Check the filter system and make sure that it is installed correctly.
  • Beko DIS15010 | User Manual - Page 30
    Troubleshooting • Rinse aid is not sufficient. >>> inside for a while. Unload the dishes after the pieces cool down to a touchable level. Start unloading process from the lower basket. Thus, dropping of water remained on a piece at upper after finishing 30 /35 EN Dishwasher / User's Manual
  • Beko DIS15010 | User Manual - Page 31
    installation dishwashers. • Kitchen utensils that are already corroded are washed in dishwasher. >>> Rust on a corroded item can migrate to other stainless steel surfaces and cause corrosion on those surfaces as well. Such items should not be washed in dishwashers. Dishwasher / User's Manual
  • Beko DIS15010 | User Manual - Page 32
    Troubleshooting Pay attention to add detergent shortly before start-up of the washing. • Opening of support tines. Striking of the glasses to each other or to other dishes due to the impact of water during washing can cause breaks, or scratches on their surfaces. 32 /35 EN Dishwasher / User's Manual
  • Beko DIS15010 | User Manual - Page 33
    Troubleshooting A smear remains on glasses that resembles user manual. C If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorised Service Agent. Never try to repair a nonfunctional product yourself. Dishwasher / User's Manual
  • Beko DIS15010 | User Manual - Page 34
    , located and operated in accordance with the instructions contained in the User Instructions Booklet provided. •• Professional installation by a qualified Electrical Domestic Appliance Installer is recommended for all Washing Machines, Dishwashers and Electric Cookers •• Gas Cookers must only
  • Beko DIS15010 | User Manual - Page 35
    or 0345 6004906 Republic of Ireland All Refrigeration, All Cookers 01 862 3411 Washing Machines & Dishwashers Before requesting service please check the trouble-shooting guide in the Operating Instructions as a charge may be levied where no fault is found even though your product may still
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
User’s Manual
Dishwasher
DIS15010
Dishwasher
User’s Manual