Beko DIS16R10 Owners Manual - Page 29

Cancelling the programme, Salt Indicator, Rinse Aid Indicator, Adjusting the amount of, rinse aid,

Get Beko DIS16R10 PDF manuals and user guides View all Beko DIS16R10 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

OperatIng the product Cancelling the programme Adjusting the amount of Press and hold the Programme Selection / rinse aid Programme Cancel keys for 3 seconds. Release 1. After turning on your machine, press the key as the Start indicator starts flashing. and hold the Time Delay and Start / Once you close the door of your machine, Pause / Cancel keys respectively. draining is completed in 2 minutes and the machine gives an audible warning when it is completed. 2. Using the Time Delay key, turn on the 6 LED. C There might be residues of detergent or rinse aid left in the machine and/or on the pieces 3. You can use the function keys to adjust the rinse aid level. If the 1st programme indicator is on, no being washed depending on the rinse aid will be dispensed step in which the programme If the 2nd programme indicator is on, 1 dose has been cancelled. of rinse aid will be dispensed. If the 3rd programme indicator is on, 2 Salt Indicator ( ) doses of rinse aid will be dispensed. If the 4th programme indicator is on, 3 Please check the salt indicator on the display doses of rinse aid will be dispensed. to see whether there is adequate amount If the 1st, 2nd, 3rd and 4th programme of softening salt in the dishwasher or not. indicators are on, 4 doses of rinse aid will be You need to refill the salt reservoir with salt dispensed. whenever salt indicator appears on the display 4. Press the On/Off key to exit the of your machine. settings menu. Your setting will be C Adjusting the water hardness level is explained in Water Softening System section. saved automatically. End of programme Rinse Aid Indicator ( ) Please check the rinse aid indicator on the display to see whether there is adequate amount of rinse aid in the dishwasher or not. You need to refill the rinse aid reservoir with rinse aid whenever rinse aid indicator appears C When the programme you have selected comes to an end, an audible warning signal will warn you to turn off your machine. This audible signal will warn you with certain intervals before it turns off. on the display of your machine. Start / Pause indicator will go off once the washing programme has ended. 1. Open the door of the machine. 2. Press the On/Off key to switch off your machine. 3. Close the tap. 4. Unplug the machine from the socket. Dishwasher / User's Manual 27/42 EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
Dishwasher / User’s Manual
27
/
42
EN
OperatIng the product
Cancelling the programme
Press and hold the Programme Selection /
Programme Cancel keys for 3 seconds. Release
the key as the Start indicator starts flashing.
Once you close the door of your machine,
draining is completed in 2 minutes
and the machine gives an audible warning
when it is completed.
C
There might be residues of
detergent or rinse aid left in the
machine and/or on the pieces
being washed depending on the
step in which the programme
has been cancelled.
Salt Indicator (
)
Please check the salt indicator on the display
to see whether there is adequate amount
of softening salt in the dishwasher or not.
You need to refill the salt reservoir with salt
whenever salt indicator appears on the display
of your machine.
C
Adjusting the water hardness
level is explained in Water
Softening System section.
Rinse Aid Indicator (
)
Please check the rinse aid indicator on the
display to see whether there is adequate
amount of rinse aid in the dishwasher or not.
You need to refill the rinse aid reservoir with
rinse aid whenever rinse aid indicator appears
on the display of your machine.
Adjusting the amount of
rinse aid
1.
After turning on your machine, press
and hold the Time Delay and Start /
Pause / Cancel keys respectively.
2.
Using the Time Delay key, turn on the 6
LED.
3.
You can use the function keys to adjust
the rinse aid level.
If the
1st programme indicator is on, no
rinse aid will be dispensed
If the
2nd programme indicator is on, 1 dose
of rinse aid will be dispensed.
If the
3rd programme indicator is on, 2
doses of rinse aid will be dispensed.
If the
4th programme indicator is on, 3
doses of rinse aid will be dispensed.
If the 1st, 2nd, 3rd and 4th
programme
indicators are on, 4 doses of rinse aid will be
dispensed.
4.
Press the On/Off key to exit the
settings menu. Your setting will be
saved automatically.
End of programme
C
When the programme you have
selected comes to an end, an
audible warning signal will warn
you to turn off your machine.
This audible signal will warn you
with certain intervals before it
turns off.
Start / Pause indicator will go off once the
washing programme has ended.
1.
Open the door of the machine.
2.
Press the On/Off key to switch off your
machine.
3.
Close the tap.
4.
Unplug the machine from the socket.