Beko DL1043 Instruction Manual - Page 14

aid and water softening salt. 4in1: Those containing glass protectors in addition to detergent, rinse aid and water softening salt. 5in1: Those containing glass and stainless steel protectors in addition to detergent, rinse aid and water softening salt. Multipurpose detergents give satisfying results only under certain usage conditions. Observe the instructions of the detergent manufacturer on the package when using such detergents. Contact the detergent producer if your dishes are wet and/or if you notice lime spots particularly on your glasses after the washing program is over. When you give up using such detergents: Make sure that salt and rinse aid compartments are full. Set the water hardness to its highest degree and perform an empty run. After the empty washing review the user manual and readjust the water hardness level so as to suit your water supply. Make the appropriate rinse aid settings. Loading the dishwasher General: Before you load the dishwasher with dishes • Remove coarse food leftovers • Place all containers such as cups, glasses and pots into the machine with the opening facing downwards (so that no water can collect) • Dishes and cutlery may not be placed above each other • Glasses may not touch • The movement of the spray arms must not be hindered • Place all large and very dirty items in the lower basket. • Small and light items can go into the upper basket. • Long and narrow items are placed in the middle of the baskets. Attention Knives and other utensils with sharp tips and edges must be placed horizontally into the upper basket due to risk of injury. Please do not overload your dishwasher and pay attention to the notes regarding dishes which are suited to the dishwasher. Only in this manner will you obtain optimal washing results with a sensible use of energy. Depending on the model, salt indicator and/or rinse aid indicator should be enabled again if they are disabled before. 13 GB