Beko DTBC8001 Owners Manual - Page 13
Auxiliary functions, 6 Warning indicators, 7 Starting the programme, 8 Child Lock
View all Beko DTBC8001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
* : Energy Label standard programme (EN 61121:2012) All the values on the chart are identified according to EN 61121:2012 standard. Consumption values may vary from the values in the chart depending on laundry type, wringing speed, ambient conditions and voltage levels. 5.5 Auxiliary functions Audible warning Drying machine makes an audible warning when the programme is completed. If you don't want it to make an audible warning, press the "Buzzer" button. When you press the Buzzer button, a light will illuminate and no audible warning will be made when the programme ends. C NOTE • You can select this function before or after the programme starts. End time If you prefer to dry your laundry at a later time, you can delay start time of the programme up to 3 hours, 6 hours or 9 hours using the Delay function. Open the loading door and place the laundry. Select the drying programme. Press the End Time selection button and set the delay time you wish. When the End Time button is pressed once, 3 hours delay is selected and the delay indicator will light up. If you press the same button again, 6 hours delay will be selected and when you press for the third time, 9 hours delay will be selected. If you press the End Time button once again, the delay will be cancelled. After the End Time selection is made, start delayed running for the programme selected pressing the "Start/Stand-by" button. C NOTE • You can add or remove laundry within end time. At the end of the Time Delay countdown, the Time Delay warning indicator turns off and drying begins Changing the end time If you want to change the duration during the countdown: Cancel the programme by turning the On/ Off/Programme selection knob. Select the programme you want and repeat the End Time selection process. Cancelling the end time function If you want to cancel the end time countdown and start the programme immediately: Cancel the programme by turning the On/ Off/Programme selection knob. Select the programme you want and press the Start/ Stand-by button. 5.6 Warning indicators C NOTE • Warning indicators may vary depending on the model of your dryer. Filter cleaning When the programme is completed, the warning indicator for filter cleaning turns on. Water tank When the programme is completed, the warning indicator to empty the water tank turns on. If the water tank fills up while the programme continues, the warning indicator starts flashing and the machine goes into stand-by. In this case, empty the water tank and start the programme by pressing the Start / Standby button. Warning indicator turns off and programme resumes. Filter drawer /Heat exchanger cleaning When the programme is finished, the cleaning symbol of the heat exchanger or filter drawer may light up. 5.7 Starting the programme Press the Start/Stand-by button to start the programme. Drying indicator will light up, indicating that the programme has started. 5.8 Child Lock The drying machine has a child lock which prevents the programme flow from being interrupted when the buttons are pressed during a programme. When the child lock is activated, all buttons on the panel except the On/Off/Programme selection knob are deactivated. Press the End Time and Buzzer buttons simultaneously for 3 buttons to activate the child lock. The child lock has to be deactivated to be able to start a new programme after the current programme is finished or to be able to interfere with the programme. To deactivate the child lock, keep the same buttons pressed for 3 seconds. Dryer / User Manual 13