Beko DTGC8101 Owners Manual - Page 13

* : Energy Label standard program (EN 61121:2012) All values in the table are determined according to EN 61121:2012 standard. Consumption values may vary from the values in the chart depending on laundry type, wringing speed, ambient conditions and voltage levels. 5.5 Auxiliary functions Buzzer / time Drying machine makes an audible warning when the program is completed. If you don't want the machine to make an audible warning, press the "Buzzer / Time" button. When you press the Buzzer/Time button, a light will illuminate and no audible warning will be made when the program ends. C NOTE • You can select this function before or after the program starts. Buzzer/Time button is used to adjust program duration while the Rack/Time programs are selected. Drying Level Drying Level button is used for adjusting to desired dryness level. Program duration may change depending on the selection. C NOTE • You can activate this function only prior to start of program. End time You can delay the end time of the program up to 24 hours with End time function. 1. Open the loading door and place the laundry. 2. Select the drying program. 3. Press the End Time selection button and set the delay time you wish. End Time LED will illuminate. (When pressed and hold the button, End Time proceeds nonstop). 4. Press the Start / Stand-by button. End Time countdown starts. ":" Separator in the middle of displayed delay time flashes. C NOTE • You can add or remove laundry within end time. Displayed time is the sum of normal drying time and end time. End Time LED will turn off at the end of countdown, drying starts and drying LED will illuminate. Changing the end time If you want to change the duration during the countdown: Cancel the program by turning the On/Off/ Program selection knob. Select the program you want and repeat the End Time selection process. Cancelling the end time function If you want to cancel the end time countdown and start the program immediately: Cancel the program by turning the On/Off/ Program selection knob. Select the program you want and press the Start/Stand-by button. 5.6 Warning indicators C NOTE • Warning indicators may vary depending on the model of your dryer. Filter cleaning When the program is completed, the warning indicator for filter cleaning turns on. Water tank When the program is completed, the warning indicator to empty the water tank turns on. If the water tank fills up while the program continues, the warning indicator starts flashing and the machine goes into stand-by. In this case, empty the water tank and start the program by pressing the Start / Stand-by button. Warning indicator turns off and program resumes. Filter drawer /Heat exchanger cleaning When the programme is finished, the cleaning symbol of the heat exchanger or filter drawer may light up. 5.7 Starting the program Press the Start/Stand-by button to start the program. Start/Stand-by and Drying indicators will illuminate to indicate that program started. 5.8 Child Lock The drying machine has a child lock which prevents the program flow from being interrupted when the buttons are pressed during a program. When the child lock is activated, all buttons on the panel except the On/Off/Program selection knob are deactivated. Press the Drying Level and Buzzer buttons simultaneously for 3 buttons to activate the child lock. The child lock has to be deactivated to be able to start a new program after the current program is finished or to be able to interfere with the program. To deactivate the child lock, keep the same buttons pressed for 3 seconds. Dryer / User Manual 13