Beko DTLP81151 Owners Manual - Page 15

End time You can delay the end time of the program up to 24 hours with End time function. 1. Open the loading door and place the laundry. 2. Select the drying program. 3. Press the End Time selection button and set the delay time you wish. End Time LED will illuminate. (When pressed and hold the button, End Time proceeds nonstop). 4. Press the Start / Stand-by button. End Time countdown starts. ":" Separator in the middle of displayed delay time flashes. C NOTE • You can add or remove laundry within end time. Displayed time is the sum of normal drying time and end time. End Time LED will turn off at the end of countdown, drying starts and drying LED will illuminate. Changing the end time If you want to change the duration during the countdown: Cancel the program by turning the On/Off/ Program selection knob. Select the program you want and repeat the End Time selection process. Cancelling the end time function If you want to cancel the end time countdown and start the program immediately: Cancel the program by turning the On/Off/ Program selection knob. Select the program you want and press the Start/Stand-by button. 5.6 Warning indicators C NOTE • Warning indicators may vary depending on the model of your dryer. Filter cleaning When the program is completed, the warning indicator for filter cleaning turns on. Water tank When the program is completed, the warning indicator to empty the water tank turns on. If the water tank fills up while the program continues, the warning indicator starts flashing and the machine goes into stand-by. In this case, empty the water tank and start the program by pressing the Start / Stand-by button. Warning indicator turns off and program resumes. Filter drawer /Heat exchanger cleaning When the programme is finished, the cleaning symbol of the heat exchanger or filter drawer may light up. 5.7 Starting the program Press the Start/Stand-by button to start the program. Start/Stand-by and Drying indicators will illuminate to indicate that program started. 5.8 Child Lock The drying machine has a child lock which prevents the program flow from being interrupted when the buttons are pressed during a program. When the child lock is activated, all buttons on the panel except the On/Off/Program selection knob are deactivated. Press the Drying Level and Buzzer buttons simultaneously for 3 buttons to activate the child lock. The child lock has to be deactivated to be able to start a new program after the current program is finished or to be able to interfere with the program. To deactivate the child lock, keep the same buttons pressed for 3 seconds. C NOTE • When the child lock is activated, the child lock warning indicator on the screen turns on. • Child lock deactivates when the drying machine is turned off and on by the On/ Off/Cancel knob. C NOTE • When the drying machine runs and the child lock is active, it beeps twice when the program selection knob is turned. If the child lock is deactivated without returning the program selection knob to its previous position, program will terminate due to the change in the program selection knob position. Dryer / User Manual 15