Beko DW686 User Manual - Page 15

! For level 5 and level 6 there is no • Water hardness can be set to difference between hardness level the desired level by pressing the settings. programme selection button. The water hardness setting is shown If the hardness of the water you with different configurations of use is more than 80°dF (French programme indicator lights. Please Hardness) or if you are using well compare the test strip with the water, we recommend that you use water hardness level table and filters and purifiers. use the programme selection button until you reach the desired * If your tap water is below 9F configuration. (French hardness), you do not need • Once you have set the hardness to use special dishwasher salt in your level press the start/stop button machine. In this case, salt indicator to save the value. The start/ light will be on continuously. stop indicator now lights up permanently. • Press the programme selection button before you switch the appliance on and keep this button pressed down. • Switch the appliance on using the on/off switch. The start/stop indicator light will start flashing. 12 GB