Beko GN1416221Z User Manual - Page 6

Important! Fitting A Different

Page 6 highlights

Important instructions regarding safety and environment We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket. The appliance must be positioned so Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store. that the plug is accessible. Important! Fitting A Different Should the mains lead of the Plug appliance become damaged or As the colours of the wires in the should it need Replacing at any mains lead of this appliance may time, it must be replaced by a not correspond with the coloured special purpose made mains markings identifying the terminals lead which can only be obtained in your plug proceed as follows: from a Beko authorised service (See diagram). agent. 1. Connect the green-yellow or green (Earth) wire to the Warning! This appliance must be earthed If the fitted moulded plug is not terminal in the plug marked 'E' or with the symbol or coloured green and yellow or green. 2. Connect the blue (Neutral) wire to the terminal in the plug marked 'N' or coloured black. suitable for your socket, then the plug should be cut off and an appropriate plug fitted. Destroy the old plug which is cut off as a 3. Connect the brown (Live) wire to the terminal in the plug marked 'L' or coloured red. With alternative plugs a 13 A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician. plug with bared cord could cause a shock hazard if inserted into a socket elsewhere in the house. FUSE FITTED WITH BS 1362 13A FUSE ALWAYS FIT BS 1362 REPLACEMENT CARTRIDGE FUSE 6mm. The moulded plug on this appliance incorporates a 13 A fuse. Should the fuse need to be replaced an ASTABEAB approved BS 1362 fuse of the same rating GREEN & YELLOW OR GREEN N BLUE OR BLACK 6mm. 32mm. 6mm. L BROWN OR RED 22mm. 12mm. must be used. Do not forget to refit the fuse cover. In the event CORD GRIP of losing the fuse cover the plug must not be used until a replacement fuse cover has been fitted. 5 / 25 EN Refrigerator / User Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27

5 / 25 EN
Refrigerator / User Manual
Important instructions regarding safety and environment
We recommend that this
appliance be connected to the
mains supply via a suitable
switched and fused socket. The
appliance must be positioned so
that the plug is accessible.
Should the mains lead of the
appliance become damaged or
should it need Replacing at any
time, it must be replaced by a
special purpose made mains
lead which can only be obtained
from a
Beko
authorised service
agent.
Warning! This appliance
must be earthed
If the fitted moulded plug is not
suitable for your socket, then the
plug should be cut off and an
appropriate plug fitted. Destroy
the old plug which is cut off as a
plug with bared cord could cause
a shock hazard if inserted into a
socket elsewhere in the house.
The moulded plug on this
appliance incorporates a 13 A
fuse. Should the fuse need to be
replaced an ASTABEAB approved
BS 1362 fuse of the same rating
must be used. Do not forget to
refit the fuse cover. In the event
of losing the fuse cover the
plug must not be used until a
replacement fuse cover has been
fitted.
Colour of the replacement fuse
cover must be the same colour as
that visible on the pin face of the
plug. Fuse covers are available
from any good electrical store.
Important! Fitting A Different
Plug
As the colours of the wires in the
mains lead of this appliance may
not correspond with the coloured
markings identifying the terminals
in your plug proceed as follows:
(See diagram).
1.
Connect the green-yellow or green (Earth) wire to the
terminal in the plug marked ‘E’ or with the symbol
or coloured green and yellow or green.
2.
Connect the blue (Neutral) wire to the terminal in the
plug marked ‘N’ or coloured black.
3.
Connect the brown (Live) wire to the terminal in the
plug marked ‘L’ or coloured red.
With alternative plugs a 13 A fuse must be fitted
either in the plug or adaptor or in the main fuse
box. If in doubt contact a qualified electrician.
FITTED WITH
BS 1362 13A FUSE ALWAYS
FIT BS 1362 REPLACEMENT
CARTRIDGE FUSE
GREEN &
YELLOW
OR
GREEN
N
BLUE
OR
BLACK
L
BROWN
OR
RED
22mm.
6mm.
6mm.
6mm.
32mm.
12mm.
FUSE
CORD GRIP