Beko HIAL75224SX User Manual - Page 19
Maintenance
View all Beko HIAL75224SX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
6 Maintenance and care General information Service life of the product will extend and the possibility of problems will decrease if the product is cleaned at regular intervals. 2 DANGER: I • Disconnect the product from mains supply before starting maintenance and cleaning works. There is the risk of electric shock! , A Is DANGER: Allow the product to cool down before you clean it. Hot surfaces may cause burns! • Clean the product thoroughly after each use. In this way it will be possible to remove cooking residues more easily, thus avoiding these from burning the next time the appliance is used. • No special cleaning agents are required for cleaning the product. Use warm water with washing liquid, a soft cloth or sponge to clean the product and wipe it with a dry cloth. • Always ensure any excess liquid is thoroughly wiped off after cleaning and any spillage is immediately wiped dry. • Do not use cleaning agents that contain acid or chloride to clean the stainless or inox surfaces and the handle. Use a soft cloth with a liquid detergent (not abrasive) to wipe those parts clean, paying attention to sweep in one direction. he surface might get damaged by some detergents or cleaning materials. Do not use aggressive detergents, cleaning powders/creams or any sharp objects during cleaning. Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass. Cleaning the hob Gas hobs 1. Remove and clean the saucepan carriers and burner caps. 2. Clean the hob. 3. Install the burner caps and make sure that they are seated correctly. 4. When installing the upper grills, pay attention to place the saucepan carriers so that the burners are centered. A Cleaning the control panel Clean the control panel and knobs with a damp cloth and wipe them dry. Do not remove the control buttons/knobs to lean the control panel. Control panel may get damaged! 1 Knob 2 Sealing element Do not use steam cleaners to clean the ppliance as this may cause an electric shock. Do not remove the sealing elements under the knobs for cleaning. 1 9/EN