Beko HQI64501FHT User Manual - Page 23

Your hob can be equipped with induction cooking zones with a diameter of 145, 180, 210 and 280 mm depending on the model. With induction feature, each cooking zone detects the diameter of each vessel placed on them. Energy builds up only where the vessel contacts with the cooking zone and thus, minimum energy consumption is achieved. Operation time constraints The hob control is equipped with an operation time limit. When one or more cooking zones are left on, the cooking zone will automatically be deactivated after a certain period of time (see Table-1). If there is a timer assigned to the cooking zone, the timer display will also turn off later. Operation time limit depends on the selected temperature level. Maximum operation time is applied at this temperature level. The cooking zone may be restarted by the user after it is turned off automatically as described above. Table-1: Operation time constraints Temperature level 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 High Power (Booster) Function Operation time limit hour 0 6 6 5 5 4 4 3 3 2.5 2.5 2 2 1 .5 1 ,5 0.5 0.5 0.5 10 minutes Overheating protection Your hob is equipped with some sensors ensuring protection against overheating. Following may be observed in case of overheating: • Active cooking zone may be turned off. • Selected level may drop. However, this condition cannot be seen on the indicator. Overflow safety system Your hob is equipped with overflow safety system. If there is any overflow that spills onto the control panel, system will cut the power connection immediately and turn off your hob. "E" warning appears on display during this period. Precise power setting Induction hob reacts the commands immediately as a feature of its operating principles. It changes the power settings very fast. Thus, you can prevent a meal (water, milk) from overflowing even if it was just about to overflow. Operating noisy Some noises may arise from the induction hob. These sounds are normal and a part of induction cooking. • Noise becomes prominent in high temperature levels. • Alloy of the saucepan can cause noise. • In low levels, a regular on/off sound can be heard because of the operating principles. • Noise can be heard if an empty saucepan is heated. When you put water or meal in it, this sound will clear away. • The noise of the fan that cools electric system can be heard. Error codes / warning messages and error sources Table-2: Cause of error Two or more keys are pressed or overflow spills onto the keys. Hob overheated No proper vessel on the zone. Touch control hardware error. Induction Indicator "E" symbol flashes "H" symbol flashes _72 symbol lights up "Fx**" symbol lights up "Ex""" symbol Display Cooking zone display Cooking zone display Cooking zone display Timer display Cooking 23/EN