Beko MGF20210 User Manual - Page 13

3 Installation and connection 3.1 Installation and connection •• Remove all packing material and accessories. Examine the oven for any damage such as dents or broken door. Do not install if oven is damaged. •• Remove any protective film found on the microwave oven cabinet surface. •• Do not remove the light brown Mica cover that is attached to the oven cavity to protect the magnetron. •• Select a flat surface that provides sufficient space for inlet and outlet ducts. 20 cm 30 cm 20 cm 20 cm The accessible surface may be hot during operation. min.85 cm •• Minimum installation height is 85 cm. •• The rear surface of appliance shall be placed against a wall. Leave a minimum clearance of 30cm above the oven, a minimum clearance of 20cm is required between the oven and any adjacent walls. •• Do not remove the legs from the bottom of the oven. •• Blocking the intake and / or outlet openings can damage the oven. •• Place the oven as far away from radios and TV as possible. Operation of microwave oven may cause interference to your radio or TV reception. 2. Plug your oven into a standard household outlet. Be sure the voltage and the frequency is the same as the voltage and the frequency on the rating label. WARNING: Do not install oven A over a range cooktop or other heatproducing appliance. If installed near or over a heat source, the oven could be damaged and the warranty would be void. Microwave Oven / User Manual 13 / EN