Beko MN13790 Owners Manual - Page 10

L3 W3 MN13790PX 677 703 >L1+300 >W1+500 Preparations prior to use 1. Remove all packing assemblies such as case fixing tape etc., especially the foam base. 2. Use warm wet cloth to clean both interior and exterior of the refrigerator, (neutral detergent can be added in warm water). 3. After leveling and cleaning the refrigerator, stand it for about 5 hours before plugging the power plug for powering on, and cool the refrigerator for 2 to 3 hours before storing foods. 1. Remove fixing tape Wipe with warm and wet cloth 2. Connect to power 3. Store food after connecting to power for 2-3 hours Do not open the doors frequently to save electricity. In hot summer, 24 hours are needed to fully freeze the food. Check the refrigerating condition on the second day. The plastics odour will disappear automatically after freezing for a while. The appliance should be located in the coolest area of the room, away from heat producing appliances or heating ducts, and out of the direct sunlight. Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance forces the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil. Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This cuts down on frost build-up inside the appliance. Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners interfere with cold air circulation, making the appliance less efficient. Organize and label food to reduce door openings and extended searches. Remove as many items as needed at one time, and close the door as soon as possible. 7