Beko TCL5249 User Manual - Page 14

Replacing, Interior, Light Bulb

Page 14 highlights

If at any time the defrost water does not drain from the collection channel, check to ensure that no food particles have blocked the drain tube. The drain tube can be cleared by pushing the special plastic plunger provided down the drain tube (2). Replacing The Interior Light Bulb Should the light fail to work, proceed as follows. 1. Switch off at the socket outlet and pull out the mains plug. 2. You may find it useful to remove shelves for easy access. Remove the light diffuser cover screw. Use cross-headed screw driver. 3. Pull off the light diffuser cover and remove the light bulb. 4. Replace the burnt-out light bulb. 5. Reassemble reversing the sequence and operations. First ensure the top of the cover is in place. 6. Carefully dispose of the burntout light bulb immediately. 7. "Replacement light bulb can easily be obtained from a good local electrical or DIYstore." 14 EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25

EN
14
If at any t±me the defrost water does
not dra±n from the collect±on channel,
check to ensure that no food part±cles
have blocked the dra±n tube. The dra±n
tube can be cleared by push±ng the
spec±al plast±c plunger prov±ded down
the dra±n tube (2).
Replacing
The
Interior
Light Bulb
Should the l±ght fa±l to work, proceed
as follows.
1.
Switch off at the socket outlet
and pull out the mains plug.
2.
You may find it useful to
remove shelves for easy access.
Remove the light diffuser cover
screw. Use cross-headed screw driver.
3.
Pull off the light diffuser cover
and remove the light bulb.
4.
Replace the burnt-out light
bulb.
5.
Reassemble reversing the
sequence and operations. First
ensure the top of the
cover is in
place.
6.
Carefully dispose of the burnt-
out light bulb immediately.
7.
“Replacement light bulb can
easily be obtained from a good local
electrical or DIYstore.”