Beko VCO62602A Owners Manual - Page 10
Vacuum Cleaner / User manual
![]() |
View all Beko VCO62602A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
4 Cleaning and care Switch off and unplug the appliance before cleaning it. A WARNING: Never use gasoline, solvent, abrasive cleaning agents, metal objects or hard brushes to clean the appliance. 4.1 Emptying the dust container 1. Press the dust container removal button (6) to remove the dust container (2) and remove the dust container in the direction of the arrow by holding from the dust container carrying handle. 4.2 Cleaning the filters A WARNING: Do not use appliances producing hot air such as hair dryer or heater to dry the filters. A WARNING: Do not install the filters without completely drying them; otherwise, smell of moisture may occur during use, water can leak from the back of the appliance or the filters may get damaged. A WARNING: Attach the filters into their places after they are dried. 4.2.1 Motor protection filter and HEPA filter This filters are located under the dust container (2) compartment. 1. Press the dust container removal button (6) and remove the dust container (2). 2. Remove the HEPA filter and motor protection filter found at the back of the dust container (2). 2. Uncap the dust container (2) and empty it. 3. When you have emptied dust, close the dust container cap (2); a click sound will be heard. 4. Insert the dust container (2) into its place by holding it from the handle. 3. After washing the sponge protection filter under running water, wring it out slightly and leave it to dry (for 24 hours minimum). 4. Shake off the HEPA inlet filter to eliminate the dusts on it. After that, you can wash it by holding its clean side under running cool water. 5. If you wash the HEPA filter, dry it at room temperature (for 24 hours minimum). Do not use it before ensuring that it is completely dry. 10 / 121 EN Vacuum Cleaner / User manual
![](/manual_guide/products/beko-vco62602a-owners-manual-5935ae5/10.png)