Beko VCS6135A Owners Manual - Page 13

Cleaning the post motor, filter, 4 Cyclone seperator, 5 Replace the brush and belt

Page 13 highlights

4 Cleaning and care 4.4 Cyclone seperator 1. Open the filter cover by pulling the latch gently. 2. Hold and pull the cyclone from its handles and take it out from the dust container. 3. Clean the cyclone with a dry cloth. 4. Follow the steps above in reverse order to assemble the parts together again. 4.5 Replace the brush and belt 3. Wash the pre-motor filter with warm water until it gets clean (let the clean filter to dry 24 hours). 1. Unplug the appliance and turn it over. 2. Remove 6 screws from the button cover. 4.3 Cleaning the post motor filter 1. Open the post motor filter cover with the release button. 3. Remove the cover. 2. Remove the post motor filter by pressing its release button. 4. Remove the brush roller and check it for wear on the belt. Loop the new belt around the motor and brush channel. 5. Hold the brush roller and stretch the belt until it can be slotted back. 3. Wash the post motor filter with warm water until it gets clean (let the clean filter to dry 24 hours). 4. After the filters are completely dry, put them back into the main body. C Rotate the brush roller to ensure free movement of the belt. 6. Refit the brush cover by screwing it back. Upright Vacuum Cleaner / User Manual 13 / 15 EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

Upright Vacuum Cleaner / User Manual
13 / 15
EN
4
Cleaning and care
3. Wash the pre-motor filter with warm water until
it gets clean (let the clean filter to dry 24 hours).
4.3 Cleaning the post motor
filter
1. Open the post motor filter cover with the
release button.
2. Remove the post motor filter
by pressing its
release button.
3. Wash the post motor filter with warm water
until it gets clean (let the clean filter to dry 24
hours).
4. After the filters are completely dry, put them
back into the main body.
4.4 Cyclone seperator
1. Open the filter cover by pulling the latch gently.
2. Hold and pull the cyclone from its handles and
take it out from the dust container.
3. Clean the cyclone with a dry cloth.
4. Follow the steps above in reverse order to
assemble the parts together again.
4.5 Replace the brush and belt
1. Unplug the appliance and turn it over.
2. Remove 6 screws from the button cover.
3. Remove the cover.
4. Remove the brush roller and check it for wear
on the belt. Loop the new belt around the motor
and brush channel.
5. Hold the brush roller and stretch the belt until it
can be slotted back.
C
Rotate the brush roller to ensure
free movement of the belt.
6. Refit the brush cover by screwing it back.