Beko VRT61821V Owners Manual - Page 10

3 Operation C Check the power indicator LEDs (15) during operation. As charging level decreases, these indicators will gradually go off and the appliance will stop working when all indicators are off. C Appliance will automatically stop if it is placed on charger while still in use. 2. The charging indicator LED (15) will come on and the product will start to be charged; when charging is done, all charging indicators will be on. - If the charging indicator LED (15) is on, this means that the product is being charged. - If all levels of the charging indicator LED (15) is on, this means that the product is fully charged. C It takes up to 4-6 hours for the appliance to be fully charged. 3.5 Starting cordless vacuum cleaner 1. Press removal button (5) to remove the vacuum cleaner from the body (8). 2. Press on/off button (7) of the cordless vacuum cleaner to switch on your appliance. 3. After using the appliance, switch it off by pressing the On/off button (7) of the cordless vacuum cleaner. A WARNING: Appliance cannot be operated during the charging process. 3.4 Operating the appliance 1. Press the on/off button (2) to switch on the appliance. 2. When you press on/off button (2), appliance will start at maximum speed. Press speed adjustment button (3) to use in low speed. When you press speed adjustment button again, the appliance will run at maximum speed again. 3. After using the appliance, switch it off by pressing the On/off button (2). 10 / EN Vacuum Cleaner / User Manual